STM32F103VC 使用 FSMC 中国电梯协会 HY35A SSD1963 显示屏和触摸板

JIYU AT91SAM7X256的CAN 接口协议的转换的驱动代码实现-JIYU AT91SAM7X256 CAN-interface protocol to achieve the conversion of the driver code

lpc2148 uc/gui的移植例程，keil编译环境-lpc2148 uc/gui transplant routines, keil compiler environment

arm的非向量中断通过执行IsrIRQ判断中断源，找到相应Handle***的地址。 此程序是在arm上实现向量方式中断的初始化程序-arm of the non-vector interruption through the implementation IsrIRQ judgment interrupt source, find the corresponding Handle*** address. This procedure is the arm on the way to achieve vector interrupt the initialization procedures

arm c div

用来作为IP端口扫描的程序

这是AVR的IO端口使用的代码，它可以通过数码管和LED灯指示IO口的电平变化，用ICCAVR开发-This is the AVR

#include             #include "STM32_Init.h"      int main (void)  {   int i=0;   stm32_Init();    // Init System   GPIOB->CRL = 0x22222222;  // bit0~7  output(push-pull)   GPIOB->CRH = 0x22222222;           // bit8~14 output(push-pull)                     请点击左侧文件开始预览 ！预览只提供20%的代码片段，完整代码需下载后查看 加载中 侵权举报

sdconfig.h: 该文件为SD卡读写模块配置头文件，用户可根据实际硬件条件进行修改. SD目录 : SD卡读写模块的全部文件,一般不用修改. 建议sdconfig.h文件不要放于SD目录中，因为SD目录中的文件一般无须修改,而sdconfig.h通常会有改动. -sdconfig.h: The document for the SD card reader module configuration header files, the user hardware according to actual conditions can be modified. SD directory: SD card reader module all the documents, the general need not be amended. sdconfig.h document recommends not to put in SD directory, because the SD files in the directory are not normally required to be amended and the changes are usually sdconfig.h.

这时ARM的调试用程序-time spent debugging procedures

基于TI公司DSP2812 CAN 通讯C源码-TI-based company DSP2812 CAN communication C source