参考网上的提供的代码,我把uCosII移植到MSP430f149上,分三个任务,分别是485通讯,键盘扫描,LED显示,可供参考!-online reference provided by the code, and I uCosII MSP430f149 transplant, in three tasks, namely, 485, keyboard scan, LED display, for example!

基于LPC2214的UCOS应用程序，包含了ADS7846的触摸屏校准，9325液晶屏显示，LM35温度传感器应用，DS1302实时时钟，指针式时钟显示。(Based on the LPC2214 the UCOS application of, contains the ADS7846 touch screen calibration, 9325 LCD screen display, LM35 temperature sensor applications, the DS1302 real-time clock, Analog clock display.)

本例程uCOS-II 版本为2.51,仅创建一个LED闪烁任务于 P1.0 上,每隔 0.5 秒闪动一次,任务而此例程运行于内 RAM > 300 Byte 的51内核单片机即可。-This routine uCOS-II version 2.51, only the creation of a blinking LED on P1.0 on the mission, occulting once every 0.5 seconds, and this routine mission inside running on RAM

移植到UCGUI上的汉字库12x12-transplanted to the 12x12 Store

综合实验源代码－汉诺塔-comprehensive experiment source code-HANOR

UCGUI汉字库程序-UCGUI Store procedures

usosII_V2.52_MSP430 usosII_V2.52在MSP430上的移植-usosII_V2.52_MSP430 usosII_V2.52 in MSP4 30 on the transplant

用于8051的ucos

此例程运行于内RAM > 1024 Byte的51内核的单片机即可。 比 如 ： SST89E564RD ,STC89C516RD 等 移植ucosii，本例程一共创建了3个任务，任务一开led1,任务二开LED2，任务3关闭led1和led2，并且运行到相应的任务，串口会打印出来，提示当前系统运行的状态。(This routine runs on a single chip computer with 51 cores of RAM > 1024 Byte. For example, SST89E564RD, STC89C516RD and so on For uCOSII, 3 tasks are created in this routine, the task is LED1, task two opens LED2, task 3 closes LED1 and LED2, and runs to the corresponding task, the serial port will be printed out to prompt the state of the current system running. This routine runs on a single chip computer with 51 cores of RAM > 1024 Byte. For example, SST89E564RD, STC89C516RD and so on For uCOSII, 3 tasks are created in this routine, the task is LED1, task two opens LED2, task 3 closes LED1 and LED2, and runs to the corresponding task, the serial port will be printed out to prompt the state of the current system running.)

uc gui v3.14源码 vc6.0编译通过-uc gui v3.14 compile source vc6.0