非常实用的串口调试工具，带CRC校验，请大家一用

基于vc++6.0环境的cypress USB 驱动源代码，支持块、计时、中断等传输方式。直接可以使用。-vc 6.0 on the environment cypress USB driver source code, support block, time, the suspension means of transmission. Direct can be used.

ifix的OPC驱动程序，采用OPC通信的工程上可用。-The OPC iFIX driver using OPC communications can be used on projects.

所谓固件，就是存储在程序内存中的程序,用以完成驱动程序无法完成的USB 芯片及外围芯片的初始化及控制工作[23]。USB固件程序设计是USB接口部分的主要工作，它的主要目的是：当USB设备连接到主机上时，主机可以发现新设备，然后建立连接并完成数据传输任务，也就是能够让Windows正常检测和识别USB设备。因此在USB固件程序中，最重要的工作就是USB描述符的定义和USB传输中断的处理。-called firmware is stored in the memory of the procedure, Drivers used to complete the impossible chip and external USB chip initialization and control work [23]. USB firmware design is USB major part of the work, its main objectives are : When USB devices connected to the host, the host can be found in new equipment, then establish a connection and data transmission to complete tasks, is to let the normal Windows USB detection and identification equipment. Therefore USB firmware procedures, the most important work is described USB define and USB transmission interruption of treatment.

这是用C编制的用IO命令访问PCI总线配置空间的源程序代码，敬请笑纳。-This is prepared by using C commands used IO access PCI bus configuration space, source code, please笑纳.

这是一个基于NDIS开发的中间层驱动应用程序，该程序可以实现对无线网卡的配置，包括设置SSID，认证方式，网络模式等参数。-This is a development based on the NDIS intermediate driver layer applications, The procedure can be achieved for the wireless network card configuration, including the setup of SSID, authentication, network model parameters.

单机军旗. 但没有源码. 我着急需要成为会员下载一个文件. 等下会我再上出正式的源码-single flag. But no source. I need to become a member anxious to download a document. I will wait for the next up again on the official the source

采用OPNET多址协议的仿真 比较有实用参考价值-Multiple access protocol using OPNET simulation have more practical reference value for

Cy3662在Linux下的驱程开发-Cy3662 under Linux-development drive

安装文件-installation files

TvicHW32(评估版)另一个编写驱动程序的实用工具(497KB)-Tackle (Evaluation) Another driver to prepare a practical tool (497KB)