uClinux应用收集，已在uClinux开发详解…

很好的linux嵌入式开发arm的指令集-good linux embedded development arm of the Instruction Set

适合初学者学习三星2410arm开发板模数转换编程，使用ads开发环境运行-err

> CONTACT, NORMALLY OPEN        Xname           Rname          Yname                              ----] [----     ----] [----    ----] [----     If the signal going into the instruction is false, then the output     signal is false. If the signal going into the instruction is true,     then the output signal is true if and only if the given input pin,     output pin, or internal relay is true, else it is false. This     instruction can examine the state of an input pin, an output pin,     or an internal relay. >

1) Project Description: this is a very simple frame sending test program. it will periodically sending frames.mainly used for demonstration and testing.2) Experiments and Notice 实验步骤和实验中的注意事项-- 发送模式有两种，无ACK发送，有ACK发送。-- 无ACK发送与sniffer配合测试，发送时红灯闪烁，sniffer通过串口显示cc2520 发送数据。-- 有ACK发送与cc2520rx配合测试，发送后，如收到cc2520返回的ACK则红灯闪烁表明发送成功，cc2520rx通过串口显示cc2520 发送数据。

vivi嵌入式系统bootloader--Bootloader for VIVI embedded system.

该源程序主要实现对IO口的操作，使自己对SOPC的IO口能够有更深的认识-The main source implementation of the IO port operations, so that their right SOPC" s IO port to have a deeper understanding of

射频收发两用机用于心电和氧气检测

I2C总线驱动程序(用两个普通IO模拟I2C总线)-I2C Bus Driver (using two ordinary analog IO I2C Bus)

使用MEGA16芯片，通过串口控制GSM模块，进行GSM模块配置，可以实现收发英文短信。当接受到相应短信可以自动反馈信息。编译环境为CVAVR-Use MEGA16 chip, through the serial port control of GSM module, GSM module to configure, you can achieve the send and receive SMS in English. When messages can automatically receive the appropriate feedback. Compile the environment CVAVR

使用dsPIC30F 实现交流感应电机的矢量控制源代码，可以通过此源代码学习SVPWM及交流电机的矢量控制算法-DsPIC30F realize the use of AC induction motor vector control source code, you can learn through this source code and SVPWM AC motor vector control algorithm