ucos下的driver的抽象层, 有了这一层porting将更容易

详细讲述轻量级协议栈lwip在操作系统ucos-ii下的移植，开发板为自制的arm7开发板。-the tansplantation of lwip in the operation system of ucos-ii

好用好看不看会后悔，看了不后悔，信不信由你了 -Good use看不看will regret it, read no regrets, believe it or not you

infineon的tricore版本uc/os，tc1796芯片使用(infineon' s tricore version of uc/os, tc1796 chip using)

在ARM上加载ucosii实现LED的显示并进行仿真验证 。-ARM load in ucosii realize LED display and simulation.

keil c open

说明：  这是按照前面我发的从零开始学习ucosii手册，编写成功的模板。芯片是stm32f103c8t6，移植在f103芯片上，都是同理可得。记住虽然可以直接拿着用，但是要修改对应的IO口哦，程序效果是led小灯闪烁。（有一个问题我也不太清楚，理论上c8t6的启动文件应该是startup_stm32f10x_md.s，但是用它却不能成功。用startup_stm32f10x_hd.s却成功了。）(This is a successful template written in front of the uCOSII manual that I started from zero. The chip is stm32f103c8t6, and the transplant is on the F103 chip. Remember that although it can be used directly, but to modify the corresponding IO mouth Oh, the program effect is the LED light flicker. (there is one problem I'm not very clear about. In theory, c8t6's startup file should be startup_stm32f10x_md.s, but it can't be successful with it. It was successful with startup_stm32f10x_hd.s.))

ucosII系统使用串口读取PLC控制器的信息；-read PLC data with uart on the ucosII system

用LPC2138做的07年电子设计大赛源码，基于ucos的1024点FFT。-Done in 2007 with the LPC2138 Electronic Design Contest source, based on ucos 1024-point FFT.

在2410开发板上进行红外通讯实验，代码完整，希望对你有帮助。-board in 2410 for the development of infrared communications experiment, code integrity, and I hope to help you.

uCOS-III实验_基于时间触发的合作式调度器 uCOS-III实验_基于时间触发的合作式调度器 uCOS-III实验_基于时间触发的合作式调度器 uCOS-III实验_基于时间触发的合作式调度器 uCOS-III实验_基于时间触发的合作式调度器 uCOS-III实验_基于时间触发的合作式调度器 uCOS-III实验_基于时间触发的合作式调度器