电子秤,能显示重量,设置重量,超量程报警

开发环境:ADS 1.2 目标平台:ARM:S3C44B0 显示屏:tft4.3" 480*272(24Bit) GUI:UCGUI324 项目功能:实现UCGUI在ARM7和彩屏LCD上成功移植 Seloo@tom.com 2008-10-12-Development Environment: ADS 1.2 target platforms: ARM: S3C44B0 display: tft4.3

DS1302读写一体化C51源程序 以下引脚定义部分根据实际接线情况作适当调整 sbit TIMECLK = P1^0 sbit TIMERST = P1^1 //禁止DS1302 sbit TIMEIO = P1^2 //释放数据总线-C51 source integration DS1302 to read and write the following definition of part-pin wiring in accordance with the actual situations properly adjust sbit TIMECLK = P1 ^ 0 sbit TIMERST = P1 ^ 1// prohibited DS1302sbit TIMEIO = P1 ^ 2// release data bus

粮情测控系统的设计 （基于凌阳单片机）硬件软件设计-Grain monitoring and control system design (based on Sunplus Single-chip) hardware and software design

遥控器测试程序按任意键试验版数码管指示灯闪烁。任意遥控器均可！-Remote control test procedure by pressing any key test version of digital tube indicator light flashes. Arbitrary remote control can be!

LPC932内部EEPROM操作程序-LPC932 internal operating procedures EEPROM

CAN总线与51单片机的接口原理图，使用的是sja1000和tja1040(philips).还包括了具体的文档资料和c语言控制代码(附加了LCD代码和LCD接口以及电源变换原理图).搞CAN总线一步到位.-CAN Bus and 51 microcontroller interface schematics, using the sja1000 and tja1040 (Philips). Also include the specific information and documentation control code language c (Additional code of LCD and LCD interfaces, and power transformation diagram). CAN engage in one go.

在MSP430F247上实现的LCD12864的显示-MSP430F247 achieved in the display LCD12864

本程序是基于avr单片机的atmega48的控制16*4点阵型液晶。其中main文件调用LCD.c和LCD.h文件。用户可以直接把工程中的LCD.c和LCD.h文件放到自己的程序目录下即可。-This procedure is based on the avr SCM atmega48 control 16* 4:00 LCD. Main document which calls LCD.c and LCD.h document. Users can directly to the project document LCD.c and LCD.h procedures on their own directory can be.

单片机的自动校时器-MCU automatic school-

51单片机IO 口模拟232通讯程序 占用定时器0 -51 SCM 232 analog IO communication procedures occupied Timer 0