凌阳061a单片机的定时器使用例程。包括两个定时例子

本人上个月做的一个通过短信来控制八路继电器的源程序，有需要的朋友可以参考。-Last month I make an eight-way through the message relay to control the source code, there is a need of a friend can refer to.

在51单片机系统中实现CRC校验的方法，以及CRC校验的原理-51 single-chip microcomputer system in the realization of the CRC checksum, as well as the principles of CRC Checksum

本人收集的一些C语言程序，谢谢大家的光临 希望对你们有所帮助-I collected a number of C language programming, thank you all for coming hope to help you

用51单片机内部定时器实现数字钟功能，可以显示小时，分，秒，误差很小。-51 single-chip microcomputer with internal timer digital clock function, can display hours, minutes and seconds, the error small.

功能： 1、作为下位机采集8255数据并将此数据通过通讯送出， 2、采集数据为BCD，先转换成二进制，处理后再转换成BCD 3、通讯采用方式3，多机通讯，上位机发地址时TB8=1，其他TB8=0 下位机SM2=1，RB8=1时产生中断后使SM2=0收发数据，结束后SM2=1-Features: 1, as under the 8255-bit machine data collection and communications sent through this data, 2, collected data for the BCD, first converted into binary, and then converted to deal with BCD 3, communication using methods 3, multi-machine communication, PC-fat address TB8 = 1, other TB8 = 0 under the digital machine SM2 = 1, RB8 = 1 when the failure to make SM2 = 0 to send and receive data, after the end of SM2 = 1

无线解码程序，是用于多种无线报警主机的解码-wireless decoding procedure is used in a variety of wireless alarm host decoder

基于at89c2051的方波发生器，MAIN: MOV SP,#60H 设置SP指针 MOV R0,#50H 显示缓冲区首地址时50H ML0: CLR A MOV @R0,A 显示缓冲区清零 INC R0 CJNE R0,#55H,ML0-AT89C2051 based on the square-wave generator, MAIN: MOV SP,# 60H Set SP pointer MOV R0,# 50H shows that the first address buffer 50HML0: CLR A MOV @ R0, A display buffer cleared INC R0 CJNE R0,# 55H, ML0

eo2c5 实现 led 键盘控制 verilog 编程-keyboard led control to achieve eo2c5 programming verilog

一个单片机开发的软狗程序-a microcontroller development of the soft dog procedures

STC单片机eeprom测试c语言程序（带串口发送程序）-STC Single-chip EEPROM test c language program (with Serial Send procedure)