SCM IO insufficient use of this circuit keyboard circuit and procedures on the e...

AVR_Meag8模拟USB接口，并实现数模采集ADC，包含PC机端源码-USB interface AVR_Meag8 analog and digital-analog acquisition realize ADC, includes PC-side source

用汇编语言编写的超声波测距控制源程序采用AT89S51,12ＭＨz晶振 -Prepared by using assembly language source code control using ultrasonic ranging AT89S51, 12MHz crystal

51单片机驱动can控制器sja1000的源程序-MCS-51 DRIVER CAN-BUS CONTROLLER SJA1000 SOURCE PROGRAM

51单片机ASM程序-51 SCM ASM procedures

proteus仿真的单片机控制交通灯的例子。-Proteus simulation of single-chip microcomputer to control traffic lights example.

相关富士通单片机实用资料5-related practical information MCU 5

这是我自已写的HD44780 LCD1602液晶屏的程序，是基于AVR单片机上实现的。 /************************************************************************************************** * 简介 * * 本模块仅使用于字符显示液晶模块 * * 当前版本的驱动仅支持以下类型LCD模块驱动: * Hitachi HD44780 或与之兼容的芯片. * * LCD显示函数支持以下格式: * 1 line x 16 characters 2 lines x 16 characters 4 lines x 16 characters * 1 line x 20 characters 2 lines x 20 characters 4 lines x 20 characters * 1 line x 24 characters 2 lines x 24 characters * 1 line x 40 characters 2 lines x 40 characters *说明： * 1 line x 16 characters 需要定义为2*8的液晶模块 * * 不支持外部内存模式 **************************************************************************************************/ -This is my own written HD44780 LCD1602 LCD procedure is based on the AVR Single Chip achievable. /*************************************************************************************************** Introduction** This module uses only the characters displayed in the LCD module** the current version of the driver

TS12864液晶驱动，max7219数码管驱动，键盘串行驱动，C8051F120芯片ADC和DAC驱动，可定位任意长度和宽度的FIFO源。实现了单级触发、三级触发、起始触发、终端触发、三级触发等功能。在示波器中，XY模式显示清晰的8通道逻辑信号

用数组做的八路单片机跑马灯试验，先逐个点亮，再奇偶交替点亮。-Eight-way done with an array of single-chip test Marquee, lit one by one first, then odd-even turn light.

430成都技术培训会代码，使用IAR-4.10打开。-430 technical training in Chengdu will be the code, the use of IAR-4.10 open.