刚做的89C51驱动12864液晶显示字符＆汉字 刚做的89C51驱动12864液晶显示字符＆汉字...

是北京智心工作室的基于MPC8280设计的核心板使用手册，用的不错。该核心版兼容MPC8270，MPC8260，MPC8250等PowerQuiccII的CPU，将所有的GPIO和LocalBus总线信号引出来了，支持单Flash运行，便于设备系统使用小PLCC升级。-Moses heart of Beijing studio MPC8280-based board to use the core of the design manual, used good. Compatible version of the core MPC8270, MPC8260, MPC8250, etc. PowerQuiccII the CPU, all the GPIO and LocalBus bus signal leads, and support for Flash to run a single, easy to use small PLCC equipment system upgrade.

从大量的wince源代码中剥离出的fat文件系统源代码.移植性非常高. 里面带有source i.rar-Wince from a large number of source code stripped out of the fat file system source code. Portability is very high. Inside with a source i.rar

44B0modbus_ascii程序要的-44B0modbus_ascii procedures to the

ATJ2091N 54版源程序-Source version of ATJ2091N 54

aic33u mcbsp：使用mcbsp模块连接aic33，在HPu OUT和LINEu OUT上输出1Khz音调；

STM32F107的代码，使用串口1主串口  拖着234三个串口 实现透传功能 串口1 接收到FB开头的指令会做自动分拣，自动转发给指定串口，其余串口收到相应指令后会转发给串口1

该代码包可以加到ADS环境中，使嵌入式开发出图行界面。该代码全部是C程序。-Code package can be added to the ADS environment to develop embedded graph line interface. The code is all C procedures.

EasyARM2104开发套件串口测试源代码。-EasyARM2104 Boards serial testing source code.

用于自动喷胶机的PID算法，基于热熔胶的加热温度控制，过冲不高过2度，精度有0。5度-For automatic glue machine PID algorithm, based on hot melt adhesive heating temperature control, overshoot does not exceed 2 degrees, the precision of 0.5 degrees

linux一直到ARM平台（三星2410）的详细步骤，包括bootloader，uboot的移植和编译，开发环境的搭建和配置，非常详细-linux until the ARM platform (Samsung 2410) detailed steps, including the bootloader, uboot transplant and compiler, development environment set up and configure, very detailed