实现多种单片机相互通信中的从机部分，单片机互相控制

MOTOROALA HCS12系列的初始化LCD及寄存器初始化！-MOTOROALA HCS12 series of LCD and register initialization initialize!

ARM7的一些程序代码,有点帮助,可以下来-ARM7 some code, a little help can be down Rare

AVR图形信号发生器-AVR graphics signal generator

本文档包括单片机系统中常用到的时钟中断、通讯及键盘扫描等模块(见所附源程序)的说明。这些模块使用前后台系统模型。为达到最大的灵活性, 需要在用户工程中定义config.h文件, 在其中定义各模块可选参数的设置，而不是直接更改源代码。-this document, including SCM system clock used to the interruption communications and keyboard scanning modules (see accompanying source code) Note. These modules use before and after the Taiwan model. To achieve maximum flexibility in user defined config.h engineering documents, in the definition module optional parameter settings, and not to directly change the source code.

这是ch375与单片机51接口应用程序，用keil51编译器打开即可-ch375 interface with the MCU 51 applications, with keil51 compiler can be opened

HT1622 单片机驱动 LCD显示驱动新片的单片机控制方法-HT1622 LCD display driver in new MCU control method

MSP430框架程序。适用于MSP430F449，其他型号需要适当改变。 不使用的中断函数保留或者删除都可以，但保留时应确保不要打开不需要的中断。 保留中断函数，编译器将会为BSL密码填充所有的字节。-MSP430 framework procedures. Applicable to MSP430F449, other models need to be properly changed. Do not use the interrupt function can be retained or deleted, but should be retained to ensure that do not open unwanted interruption. Retain the interrupt function, the compiler will fill all of the BSL-byte password.

温度控制 可以显示 大家可以参考,可以给下意见-Temperature control can show we can refer to, can give advice under the

Keil写的320*240的液晶显示程序。很有参考意义。-Keil written 320* 240 LCD display program. Very useful.

采用C51编写的基于C8051F020单片机的定时器实用程序。-using C51 prepared by the C8051F020 timers utility.