This is a C8051F410 comparator source, is very beneficial for modular programmin...

linux 下CAN总线驱动源码,该程序已验经过,成功运在2510上.-linux CAN bus driver source code, the post-mortem after the procedure has been successfully transported in 2510 on.

本程序是显示模块的例程，所接器件为四位八段led数码管，其中PTB0-PTB3 与数码管的位选相连接，PTB4，PTB5与74LS164连接确定你开发板上拨码开 关JP1（图片上的12）的两位和JP4（图片上的9）的5、6、7、8位处于on）， 而其他位处于远离on！-This procedure is the routine display module, the access device for four eight led digital tube, which PTB0-PTB3 bit digital tube and connected to the election, PTB4, PTB5 with 74LS164 sure you connect the development of on-board DIP switch JP1 ( picture on the 12) two and JP4 (picture on the 9) of 5,6,7,8 located at on), while the other located at far away from the on!

c51 电子琴代码，调试通过。以及硬件原理图，第一次上传代码，请多多指教-C51 flower code, debugging through. And hardware schematics, From the first code, the exhibitions

51单片机控制 1602液晶显示 读取PS2键盘程序 按键会在1602上显示所按键-51 single-chip control 1602 to read LCD PS2 keyboard program keys will be displayed on the button 1602

手写识别芯片EPH1100的驱动源码，基于Linux平台.-handwriting recognition chip EPH1100 driver source code, based on the Linux platform.

下面是嵌入式C代码，用于在LCD上生成自定义字符。

Enviroment setup for u-boot with omap3530

WinCe下串行通讯的实现-WinCe Serial Communication for the

ucLinux is a very good embeded sytem. Most of company use this as their development OS.-ucLinux is a very good embeded sytem. Most o f company use this as their OS development.

如何第 c 程序接口与单片机键盘 （16F877 或 16F877A 是相同），还图书馆的数字小键盘