dsp2833x系列头文件

DEC6713板卡上通过GPIO来点亮、熄灭LED的测试程序。-DEC6713 board to light up through the GPIO, LED out of the test procedure.

C6000系列DSP FFT编程指南-C6000 DSP FFT Programming Guide

tms320f28335芯片esci模块的详细配置及例程。其中包括如何通过esci实现323通讯以及485通讯的例程，以及通讯自检测功能。-tms320f28335 chip module esci detailed configuration and routines. These include how esci achieved 323 communications and 485 communication routines, as well as communication from the detection.

源程序是在VisualDSP环境下开发出来的，目标处理器是4片AD公司的TS1O1 DSP。IDE_FAT32用来在硬盘上创建FAT32文件系统；2）i2c_test编写IIC总线；3）codec_a_in_pal_cf_frame是加载到FLASH的程序，板子在脱离PC自动上电时会把PAL制的图像直接存到CF卡里，CF卡的文件系统是FAT16；4）codec_a_in_pal_buf_boottest是可加载的DSP图像直通程序；5）ADSP-TS101prog_driver是flash的驱动程序。-source of the VisualDSP environment developed, targeted four processor is the company"s AD TS1O1 DSP. IDE_FAT32 used in the drive to create FAT32 file system; 2) to prepare i2c_test IIC bus; 3) codec_a_in_pal_cf_frame FLASH is loading procedures, the board automatically from the PC on when power will be the PAL system images directly to CF card, the CF card is the FAT16 file system; 4) can be loaded codec_a_in_pal_buf_boottest DSP image through procedures; 5) ADSP-TS101prog_driver flash is the driver.

IDCT 反离散余弦变换原程序-IDCT inverse discrete cosine transform the original procedure

本程序是在CCS开发环境中，基于DSPDM642的音频驱动，音频芯片为TLV320ALC23B。-procedures in the CCS development environment, based DSPDM642 audio drive, TLV320ALC23B audio chip.

介绍如何使用MatLab和CCS建立联系，通过MatLab调试DSP；-MatLab，CCS,DSP

一个dsp源程序-a dsp source

在DSP开发板上调试通过的XF引脚测试程序，可以使发光二极管交替闪烁-in DSP development board debugging XF pin through the test procedure can alternately blinking LED

5416完整例程，包含所有完整编译文件，已成功编译过-5416 integrity routines, including a complete translation of all documents, has been successfully compiled