DES/3DES算法的C语言实现，我对代码进行优化。只需要几十个字节的内存就可以。很适合用于单片机等下位机使用。...

stc单片机IAP源码,可将数据写入单片机内部FLASH中,无须外扩FLASH,速度快-stc IAP source SCM, data can be written into the internal FLASH MCU, FLASH without foreign expansion, speed

52下1601液晶驱动程序-52 LCD Driver

利用8051单片机实现对1602液晶显示器驱动，实现时钟功能。-8051 to realize the use of liquid crystal display driver 1602, realize the clock function.

powerpc原理图 vhdl开发 RDMPC8260RTRLAYSCH.zip-powerpc schematic VHDL development RDMPC8260RTRLAYSCH.zip

* 功能：运行RTC进行计时，将所时间值不断的通过串口向上位机发送，并把秒的值输出数码管D1 * 上显示。上位机运行EasyARM软件，在串口发送/接收窗口观察。 * 说明：* 通讯波特率115200，8位数据位，1位停止位，无奇偶校验。-* Function: RTC to run for a time, the time value will be constant upward through the serial-bit machine to send, and seconds values D1* output digital tube display. PC running EasyARM software serial port to send/receive window of observation.* Description:* 115200,8 bit baud rate of communication data bits, 1 stop bit, no parity.

鼠标的单片机驱动程序 把鼠标的四条线接在89c52 上把程序编译好后下载进去 就可使用。但要看好接口。-failed to translate

在AVR单片机下通过USART实现串口通讯，里面包含有其配置及源码。-In the AVR microcontroller achieved through USART serial communication, which contains its configuration and source code.

控制板与串口通信程序 用串口命令让汽缸动作-Control panel with the serial communication program so that the cylinder moves with the serial command

单片机系统上电后，P0 口和 P1 口都被清 0。然后，你规定一个由 6 个数字构成的序列（每个数字从 0～F 中选取），比如 E、8、9、0、7、F。然后每次当单片机检测到外部中断 0发起中断时间时，读取 P0 口和 P1 口上的状态值，当连续 6 次外部中断事件的对应的数字序列构成你所设定的序列后（举例来说，如果 P0.0 是 1，P0 和 P1 的其他管脚是 0，那么我们称为检测到一次数字 0），从串口打印输出一幅类似下图的 16×16 的ASCII码的圣诞树图片。-Single-chip microcomputer system after power, P0 and P1 mouth I have been ching 0. Then you set a six figure constituted by the sequence (each number from 0 ~ F in selected), for example, E, 8,9,0,7, F. And then each time a single-chip detects external interrupt 0 initiated interruption time, I read the P0 and P1 mouth on the state value, when a row 6 times the corresponding external interrupt events constitute digital sequence set your sequence (for example example, if P0.0 is 1, P0 and P1 of the other pin is 0, then we called a number of detected 0), a printout from the serial port under similar 16 × 16 map of the ASCII code of the Christmas tree图片.

LPCEB2000-s单片机rtc的控制程序，希望对大家有所帮助-LPCEB2000-s single-chip rtc control procedures, and they hope to help everyone