温室环境的监测与控制

DE2_NET ------- This designs demonstrates how to use the Ethernet port using a Nios II system on the DE2 board. It sends packets, and using a loopback Ethernet cable, it"ll receive the same packets which are then displayed. It also works if the board is connected to another packet source. Running the Design ------------------ 1) Launch the Quartus II software. 2) Open the DE2_NET.qpf project located in the DE2_NET folder. (File menu -> Open Project) 请点击左侧文件开始预览 ！预览只提供20%的代码片段，完整代码需下载后查看 加载中 侵权举报

应用背景 VB写的控制程序，通过PC端上位机控制，在电路板上实现相应的演示效果。  VB write control procedures, through the PC side of the upper computer control, on the circuit board to achieve the corresponding demonstration effect. 关键技术首先 烧写程序到单片机   晶振 11.0592MHZ连接好串口线打开上位机软件 选择好COM端口  设置波特率为9600 First of all burn to write programs to chip crystal 11.0592Mhz serial line connection open PC software select the COM port to set the baud rate of 9600

max7219驱动数码管，简单易懂，适合初学者。-MAX7219-driven digital control, easy-to-read, suitable for beginners.

该工程是针对XILINX公司的ZYNQ7020平台上移植的uCOSII操作系统，详细讲解了移植方法，希望对大家有所帮助。

omap3 serial boot host side code

电源管理代码 基于linux2.6.10！apm方式的电源管理！很好的资料！做arm平台使用-Power management code based on linux2.6.10! apm power management mode! Very good information! Do arm platform

两块单片机模块，在这两块单片机上焊接上蓝牙主从模块，以及数码管和蜂鸣器，并且有温度传感器，在温度发生变化后，单片机1向单片机2发送电平信号，实现通信，并且发出相应的警报。

led led ledl ed  led led led led

这是一个源代码,USB的挺不错的,希望大家下载下来看看.,一-This is a source code, the USB quite good, we hope to see down the download. , A

TinyG，开源6轴运动控制器包括硬件和软件。这些项目是工作的CNC控制器和3D打印机控制器。