program

针对dsp 6455 的csl支持库，高性能6455开发必备-Csl for dsp 6455 in support of the library, the development of essential high-performance 6455

Implementing a Software UART on the TMS320C54x with the McBSP and DMA

TMS320F2812上用的几个测试程序。含AD,SPI等-TMS320F2812 use several testing procedures. With AD, SPI, etc.

使用TI的DSP2407驱动液晶25F57lcd-using the TI DSP2407 to drive the lcd 25F57lcd

基于TMS320LF240芯片 测试串口通信程序-TMS320LF240 based serial communications chip testing procedures

TI公司DSP的VP口捕获高清连续视频流或图片的驱动程序源码！-TI

Balackfi processor RTC code example-Balackfi processor code example RTC

录DEC6713的UART串口的测试程序。需要将板上的跳针JP3、JP5各自短接，将UART通道A 和通道B均配置为RS232方式。-Recorded in the UART serial DEC6713 test procedures. Need to jump on-board pin of JP3, JP5 their shorted to UART channel A and channel B are configured for RS232 mode.

源程序是在VisualDSP环境下开发出来的，目标处理器是4片AD公司的TS1O1 DSP。IDE_FAT32用来在硬盘上创建FAT32文件系统；2）i2c_test编写IIC总线；3）codec_a_in_pal_cf_frame是加载到FLASH的程序，板子在脱离PC自动上电时会把PAL制的图像直接存到CF卡里，CF卡的文件系统是FAT16；4）codec_a_in_pal_buf_boottest是可加载的DSP图像直通程序；5）ADSP-TS101prog_driver是flash的驱动程序。-source of the VisualDSP environment developed, targeted four processor is the company"s AD TS1O1 DSP. IDE_FAT32 used in the drive to create FAT32 file system; 2) to prepare i2c_test IIC bus; 3) codec_a_in_pal_cf_frame FLASH is loading procedures, the board automatically from the PC on when power will be the PAL system images directly to CF card, the CF card is the FAT16 file system; 4) can be loaded codec_a_in_pal_buf_boottest DSP image through procedures; 5) ADSP-TS101prog_driver flash is the driver.

dsp控制器tms320lf2407的硬件说明书-dsp controller hardware specification tms320lf2407