AT91RM9200的异步串口调试程序,波特率为1152

基于Luminary的Cortex-M3的CAN总线收发程序，包括驱动库和例程。-Luminary of the Cortex-M3-based CAN-bus transceiver procedures, including the driver library, and routines.

MiniGUI在AT91RM9200上的移植，MiniGUI在AT91RM9200上的移植-AT91RM9200 MiniGUI in the transplant, MiniGUI on the AT91RM9200 transplant

yuv to rgb convertor for ARM

通过观察EASYARM2200教学实验平台上的LED1-LED8的显示判断74HC595数据移位是否正确-EASYARM2200 teaching experiment by observing platform LED1-LED8 display data 74HC595 shift to determine whether the correct

三星公司ARM芯片44B0X的开发板应用程序，包括USB，网络等源代码-Samsung ARM chip 44B0X development board applications, including USB, network source code

Realizing an MP3 player with the LPC2148, using libmad and EFSL This Application Note describes how to integrate the libmad MPEG 1/2 layer 3 library and the Embedded File System Library EFSL in a LPC2148 device to realize MP3 player. The Keil MCB2140 board is used to test the application and the Rowley CrossStudio for ARM has been chosen as a reference tool-chain. -Realizing an MP3 player with the LPC2148, using libmad and EFSL This Application Note describes how to integrate the libmad MPEG 1/2 layer 3 library and the Embedded File System Library EFSL in a LPC2148 device to realize MP3 player. The Keil MCB2140 board is used to test the application and the Rowley CrossStudio for ARM has been chosen as a reference tool-chain.

这个工程是基于rt-thread的STM32四轴飞控源码，源代码是参照国外crazyflie的代码，目前可以实现基本的姿态解算，PID控制，四通道遥控数据读取，PWM输出频率为50Hz，传感器包括MPU6050、MS5611、HMC5883L，预留GPS接口

ARM S3C2410处理器 nandflash（k9f1280）驱动程序 开发环境：ads1.2-ARM S3C2410 processor nandflash (k9f1280) driver development environment: ads1.2

一个ARM2410嵌入式系统开发网卡驱动源程序,可以直接移植.-an embedded system development NIC driver source code, can be directly transplanted.

我创建了为 ARM 处理器我想控制这个程序我 lcd 与我有使用 ARM 32 位 lpc2124 处理器我连接端口 0 上 8 位模式下，液晶屏和模拟值读取的可变电阻和 adc 的 ARM 处理器将它转换成数字和 adc 值在液晶上显示的电压。