EMC的开发库 是单片机性价比高的选择 提高快速开发

一个基于STC89C52的单片机程序，可以通过按键来不停发送100ms（时间可调）的脉冲，通过定时器控制-STC89C52 microcontroller-based procedures, can be sent through the button to stop 100ms (time adjustable) pulse, through the timer control

这个是实时时钟芯片DS1302的驱动程序，采用c51编写，编程时只需要修改一下SCL,IO,RST的引脚定义即可，经过测试，完全好用-This is a real-time clock chip DS1302 driver, using C51 preparation, programming, only need to modify about SCL, IO, RST pin can be defined, tested and fully use

基于61202控制芯片的LCD液晶显示驱动程序。-LCD controller chip LCD driver.

本人at89c51snd1c主控IC增加了128*32点阵驱动显示，帮助MP3DIY者学习用-I at89c51snd1c control IC increased by 128* 32 dot matrix display drive to help those who learn MP3DIY

该头文件配合key.c，在main函数中调用key.c，都文件中添加key.h，使软件更清晰，一目了然-The header file with key.c, in the main function call key.c, all files add key.h, so that software is more clear at a glance

这是一个用汇编语言编写的程序,用来控制电阻加热炉温度-This is a compiled language with the procedures used to control the temperature resistance furnace

很有参考价值的51单片机串口程序，正在搞串口的看一看-great reference value of 51 MCU procedures, is now pursuing a look at the serial port

时钟芯片DS1302的使用,用LED显示的，具有键盘调节功能,在Keil下测试通过-The use of clock chip DS1302 with LED display with a regulatory function of the keyboard, under the test adopted in Keil

本程序是下个双通道充电器的原程序,充两节NI-MH电池,-This procedure is the next dual-channel charger for the original procedure, two rechargeable NI-MH battery,

CC2420 提供了发送确认帧的固件，使能AUTOACK 将使得硬件可以自动生成确认帧。-CC2420 provides a frame to send to confirm the firmware so that it can AUTOACK will allow the hardware can automatically generate confirmation frame.