wince上Nand Flash的源代码，希望对大家有帮助。

编程修改网卡mac地址的方法-card mac address ways

用freescale的芯片IIC程序,可以在8位,16位freesacle芯片上使用,可以驱动8位地址,16位地址大IIC总线器件.-IIC programs with freescale chips can be in 8-bit, 16-bit freesacle chip to use, can drive an 8-bit address, 16-bit address large IIC bus device.

U－Boot 1.3.1修改后的源码.1马

解决smartarm2200串口下载问题的程序， 使用ads1.2可以观看全部代码-smartarm2200 solve the serial download procedures, ads1.2 can use to watch all the code

提供的程序是供四相步进电机使用。本实验使用的步进电机用直流+12V电压，电机线圈由A、B、C、D四相组成。 2. 驱动方式为四相单四拍方式,各线圈通电顺序如下表。表中首先向A相线圈输入驱动电流，接着向B，C，D线圈通电，最后又返回到A相线圈驱动，按这种顺序轮流切换，电机轴按顺时针方向旋转。若通电顺序相反，则电机轴按逆时针方向旋转。-provide for the procedures of the four-phase stepper motor use. This experiment used the stepper motor 12V DC voltage electrical coils A, B, C, D phase. 2. Four-driven approach to making four single-phase, the coil electrifying sequence the following table. Table A first phase coil input drive current, then to B, C, D coil electricity and eventually return to the A-phase coil driven by the rotation order of this switch, the electrical axis by rotating clockwise direction. If electricity in reverse order, the motor shaft by the anti-clockwise rotation.

要生成一个故障排除设备 obd2 汽车从协议的项目支持。此代码仅 iso 但硬件设计以支持所有协议是 5车辆的示例：男子梅赛德斯-奔驰宝马标致雪铁龙起亚汽车......

ds1302温度测试，C语言源程序，经过测试使用-ds302

关于嵌入式系统的串口开发的程序，可以参考。-Serial port on the embedded system development process, can refer to.

s3c44b0开发板的led实验。虽然对于高手来说简单，但对于初学者来说还是有一定的用处的。-It s mainly about led test for s3c44b0.Hope it will help you someway.

复旦大学Nios的经典教程，主要包括FPGA的配置等-Classic tutorial University Nios, including FPGA configuration, etc.