F2812 the USB detection program, tried, easy to use.

一个TMS320　5402与51芯片，其中以51来自举的程序．软件　是CCS打开．有兴趣看一下．用51驱动TMS320 5402-TMS320 5402 with a 51 chips, which held 51 from the procedure. CCS software is opened. Are interested in reading about. Drivers with 51 TMS320 5402

在DSP6416T上实现的二次引导程序，可以对烧写的程序进行二次引导！-DSP6416T achieved in the second guided procedure, the procedure can be carried out on the programmer to guide the second!

uc/os在2407上的移植代码，有一定的参考意义。-uc/os in 2407 on the transplant code, a certain reference value.

SEED-DEC6713共可实现2种Boot方式，分别为EMIF引导和HPI 引导。这里是通过EMIF扩展的FLASH引导的测试程序。-SEED-DEC6713 achieve a total of two kinds of Boot mode, respectively EMIF and HPI guide to guide. Here are the FLASH through the EMIF boot to expand the test procedure.

这个程序是在DSP开发平台CCS下运行的， 功能是对外围设备AIC23和MCBSP初始化-is in the process of DSP development platforms running under CCS, the external function of the equipment and AIC23 MCBSP Initialization

DSP2812 SCI - 同计算机通信，采用超级中断接受数据-DSP2812 SCI- with computer communications, the use of super-interrupted accept data

讲述了cordic的一般原理，用c来实现，可以易于dsp的实现-cordic described the general principle, using c to achieve, can easily achieve the dsp

数字I/O实验主要完成的功能： 在此实验中，SEED-DEC5416 首选进行初始化，包括对外设 UART、本身频率的设定及一些状态区的初始化。然后等待 SEED-MMI5402 发送命令；SEED－DEC5416 响应交通灯自动模式、交通灯手动手动模式、交通灯东西通、交通灯南北通、及交通灯的禁行与夜间模式的操作命令。同时还响应，对 SEED-DEC5416 的复位及两个单元之间的通讯故障。 -Digital I/O completion of the experiment the main features: In this experiment, SEED-DEC5416 preferred to initialize, including peripherals UART, their frequency settings and some of the initialization state of the district. SEED-MMI5402 and then wait to send commands SEED-DEC5416 automatic mode in response to traffic lights, traffic lights manual manual mode, the traffic light east-west pass, pass traffic lights north and south, and traffic lights at night and cut-line mode command. At the same time, also responded to the SEED-DEC5416 reset and communication between two modules fault.

TI TMS320LF2407A A/D 转换程序 -TI TMS320LF2407A A/D converter

使用F2812产生PWM波形，EVA下面的T1PPWM、T2PWM、PWM1-6均输出频率为1KHz、占空比为40%的PWM波形。T1PWM、T2PWM、PWM1-6输出的是不对称的PWM波形。EVB下面的T3PWM、T4PWM、 PWM7-12均输出频率为1KHz，占空比为40%的PWM波形。T3PWM、T4PWM、PWM7-12 输出的是对称的PWM波形.