自动生成数字

该文件使用VS 创建了一个实例来使用 Google Breakpad在程序崩溃时来生成dmp文件()

离子束模拟求解器，能求解空间电荷力，及求解弗拉索夫方程(Ion Beam Simulator，Space charge density calculation from the trajectories . 4. Vlasov iteration using features 1 to 3 )

用C++编写的实现GVF的活动轮廓模型的提取，值得你参考(Extracted with implementations written in C++ GVF active contour models, it is worth your reference)

说明：  Engine Packet for Unreal Engine

STM32作为主控芯片，72Mhz，利用DMA+PWM实现驱动WS2812，创建16个并行800kBit / s数据流的想法如下： 使用定时器每1.25us创建一个800kHz的时基和一个DMA请求。 使用2个比较模块在低位时间（350ns）和高位时间（700ns）下创建DMA请求 1.25us DMA请求将GPIO端口的所有位设置为高电平 350ns DMA请求将数据从帧缓冲区传输到GPIO端口。如果该位为0，GPIO引脚将变为低电平，否则将保持高电平。 700ns DMA请求将所有GPIO引脚设置为低电平。 重复步骤1到3，直到发送所有位。 这产生脉冲周期为1.25us，脉冲宽度为350ns或700ns的脉冲流，具体取决于脉冲表示的位值，通过DMA将数据传输到GPIO端口意味着每16个LED每位需要一个字（两个字节）。每个LED 24位，每16个LED 24个字（48个字节）。(The idea to create 16 parallel 800kBit/s data streams is the following: Use a Timer to create an 800kHz time base and a DMA request every 1.25us. Use 2 compare modules to create DMA requests at the low bit time (350ns) and the high bit time (700ns) The 1.25us DMA request sets all bits of the GPIO port high The 350ns DMA request transfers the data from the frame buffer to the GPIO port. If the bit is a 0, the GPIO pin will go low, otherwise it will stay high. The 700ns DMA request sets all GPIO pins low. Repeat steps 1 to 3 until all bits have been transmitted. This creates a stream of pulses with a pulse period of 1.25us and a pulse width of either 350ns or 700ns depending on the bit value the pulse represents. Transferring the data via DMA to the GPIO port means that per 16 LEDs one half word (two bytes) is needed per bit. At 24 bits per LED that makes 24 half words (48 bytes) per 16 LEDs.)

DGUS字库生成器，文本显示，希望对大家有所帮助(DGUS word library generator)

在视频跟踪过程中，图像中的背景会对跟踪有较大影响，这时就需要对图像的背景进行滤除，该代码时opencv+vs2010上运行的，利用背景减除法将背景与运动的目标进行分离，然后对运动的目标进行跟踪，实验运行效果较好。

系统目录监视工具，系统目录监视工具，源码和可执行exe(System monitoring tools catalog)

C常用算法程序集 Xu Shiliang Chapter IV(C Common algorithm Assembly Xu Shiliang Chapter IV)

说明：  使用了成品遥控车的遥控与接受模块，基于STC89C52RC,模拟PWM输出控制车速，五个前进挡，两个倒挡(The remote control and acceptance module of the finished remote control vehicle is used. Based on STC89C52RC, the output of PWM is simulated to control the speed of the vehicle. There are five forward gears and two reverse gears.)