for USB host for USB host ZZZ

录DEC6713的UART串口的测试程序。需要将板上的跳针JP3、JP5各自短接，将UART通道A 和通道B均配置为RS232方式。-Recorded in the UART serial DEC6713 test procedures. Need to jump on-board pin of JP3, JP5 their shorted to UART channel A and channel B are configured for RS232 mode.

SEED-VPM642 Hardware Test子目录包含SEED-VPM642模板硬件测试程序,包含所有端口功能测试-SEED-VPM642 Hardware Test subdirectory contains the template SEED-VPM642 hardware test procedures, including all ports functional testing

svpwm空间电压矢量控制的核心算法，用于电机控制-svpwm space vector control algorithm for motor control

ADI的Blackfin初始化代码范例，做DSP软件编程的可以学习一下，代码来自官网。-ADI" s Blackfin initialization code examples, do DSP software programming can learn about the code from the official website.

dsp硬件配置文件说明，来自dsp开发平台，TI公司的开发文档-dsp hardware configuration documentation, from dsp development platform, TI" s development of the document

DSP程序,主要是对DSP的入门程序,用于点亮发光官,这里的是8个发光官,循环点亮,俗称流水灯-DSP program, mainly for DSP entry procedures for light emitting officer, here is eight light-emitting officer, cycle light, commonly known as water lights

基于双向DC-DC变换器，可以实现双向升降压，在实验室已得到验证，DSP2812-Based on the bi-directional DC-DC converters, can achieve two-way lifting pressure, has been tested in the laboratory, DSP2812

TI的DSP-2812的SPI底层驱动程序，-TI的DSP-2812的SPI???闱????绦??

硬件要求：基于合纵达的SEED-VPM642的示例。软件要求：CCS2.2以上版本。对于想用DSP/BIOS开发的同道中人来说是很好的学习实例。-Hardware Requirements: Based on the combined vertical up the SEED-VPM642 example. Software Requirements: CCS2.2 above. For want to use DSP/BIOS development for the fellow human is a very good learning examples.

大多数的直流-直流转换器控制使用 PWM 技术，此代码允许用户控制占空比的 PWM 信号使用监视窗口中的代码作曲家工作室 (CCS)。PWM 信号的频率也可作为用户欲望通过修改"pwm_frequency"变量的初始化部分更改。频率的默认值是 25 千赫。