uboot for S3C2440 and nand flash boot 里面有对基于S3C2440 对nand flash的读写...

本人编写的用mage8控制的无线模块SRWF-1的中断方式收发程序-I prepared mage8 control with a wireless module SRWF-1 transceiver interrupt the proceedings

此代码是EASYARM调试程序的Flash的c＋＋代码，硬件调试ok，并且本人画的PCB板上也调试ok-EASYARM debugging procedures Flash c++ code, hardware debugging ok, and I painted the PCB board also debugging ok

读取EASYARM2200教学实验平台上的P0.14口上的电平值，然后将值输出控制蜂鸣器-Read EASYARM2200 teaching experiment platform P0.14 mouth on the level value, and then the value of output control buzzer

用LPC2106做的ARM开发板-do with the LPC2106 ARM development board

ZLG的SMARTARM2300开发板的pll源程序。-ZLG

mxd_tuner_ref_Ax.x.xxx :为了您使用方便，我们附上几款调试过的tuner控制代码。如果您使用的就是其中某一款tuner，可以直接把其中的代码复制到mxd_sdk_porting.c的相应位置即可。-mxd_tuner_ref_Ax.x.xxx: For your convenience, we have attached several tuner control debugging code. If you are using is one of a one tuner, which can be directly copied to the code corresponding mxd_sdk_porting.c location.

arm 4510 原理图-arm diagram 4510

用于ZLG的EasyARM LPC22系列开发板的IAR代码,绝对原创,可以直接使用ZLG开发板+H-JTAG调试,仿ZLG代码风格.欢迎拍砖~-ZLG for the EasyARM LPC22 series of IAR development board code, absolutely original, and can directly use ZLG development board+ H-JTAG debugging, code style imitation ZLG.拍砖welcome ~

驱动64个数码管，闪烁！！C51单片机使用控制使用，已经过调试可用-64 LED driver, flashing! !

通用点阵LCD程序，基于按键及菜单操作，曾于AT89S52、ADSP218x、MSP430、LPC21xx、TMS320F28xx中使用，各芯片略有不同。该例程为基于LPC21xx及128*64点阵。-Dot-matrix LCD common procedures, based on the keys and menu operation, in the AT89S52, ADSP218x, MSP430, LPC21xx, TMS320F28xx use, the chip is slightly different. The routines-based LPC21xx and 128* 64 dot matrix.