This is the

单片机通信源程序,为串口的发送和接收程序.-Single-chip communication source for the serial port of the sending and receiving procedures.

开短路检测控制箱(51单片机开发例子子程序)-Open circuit detection control box (51 single-chip development examples Subroutine)

LT_1B msp430开发板例子程序－TA_05-LT_1B msp430开发板例子程序－TA_5

CC2430 基础实验十二 AVDD实验-CC2430 12 experiments based on experiments AVDD

LT_1B msp430开发板例子程序－TA_18

12864串口液晶,包含两个文件:lcd.c与lcd.h. 调用 void printLCD(uint8 x,uint8 y,uint8 *fmt, ... ),即可将显示的字符串发送到液晶屏显示-12864 Serial LCD, contains two documents: lcd.c with lcd.h. call void printLCD (uint8 x, uint8 y, uint8* fmt, ...), can be shown in the string sent to the LCD screen display

时钟芯片PCF8563的51单片机程序 时钟不超过12MHZ，本程序已在51上试过，可以用-PCF8563 clock chip clock of 51 single-chip program does not exceed 12MHZ, this procedure has been tried in the 51

lcd 液晶屏驱动-LCD screen driver

威帆电子的精密时钟SD2303的读写程序-Granville sails of the sophisticated electronic clock read and write procedures SD2303

关于眼图实现的几个程序，主要用于电子通信系统设计-On the eye to achieve a few procedures, mainly used for electronic communication system design