-
S-35390A是可以在超低消耗电流、宽工作电压范围内工作的2线CMOS实时时钟IC。工作电
压为1.3 ~ 5.5 V、可适用于从主电源电压到备用电池电压的宽幅电源电压。通过0.25 μA的计
时消耗电流和宽范围的计时电源电压,可大幅度地改善电池的持续时间。在使用备用电池工
作的系统中,内置的自由寄存器可作为用户备用存储器来使用。在主电源切断前存储在寄存
器中的信息,可在电压恢复后的任何时候读出。
本产品因为内置了时钟校正功能,所以可以在很宽的范围内校正因振荡电路的频率偏差所导
致的时钟数据的提前或滞后。通过此功能和温度传感器的结合,可根据温度变化来对时钟进
行校正,从而实现不受环境温度影响的高精度的计时功能-err
- 2022-03-11 19:09:40下载
- 积分:1
-
NRF9E5Chinese 中文手册
NRF9E5Chinese 中文手册
- 2022-01-25 17:14:27下载
- 积分:1
-
摩托罗拉单片机的串行通信中断方式的原代码
摩托罗拉单片机的串行通信中断方式的原代码-Motorola MCU serial communication interrupt the original code
- 2022-06-26 05:41:39下载
- 积分:1
-
8051 using single
用单片机8051控制DS18B20温度传感器,包括温度上下限的设置(可以通过串口及时设置进DS18B20),读取及时温度,当温度超过上下限报警功能。-8051 using single-chip temperature sensor DS18B20 control, including the upper and lower limits of temperature settings (through the serial port settings into timely DS18B20), read the timely temperature, when the temperature exceeds the alarm function of the upper and lower limits.
- 2022-01-24 13:53:37下载
- 积分:1
-
功能完善的四层电梯程序。开门停8秒,上升或者下降一层用时5秒,有五秒倒计时数码管,楼层显示数码管,以及电梯内外楼层请求显示灯。...
功能完善的四层电梯程序。开门停8秒,上升或者下降一层用时5秒,有五秒倒计时数码管,楼层显示数码管,以及电梯内外楼层请求显示灯。-A well-functioning procedures for four-storey elevator. 8 seconds to open the door stopped, increased or decreased when a layer of 5 seconds, the 5 seconds countdown digital tube, digital tube display floor, as well as inside and outside the elevator floor indicator lights request.
- 2022-05-19 03:48:36下载
- 积分:1
-
Development of 51 single
51单片机开发的键盘扫描程序 希望对大家有用-Development of 51 single-chip microcomputer keyboard scanner hope useful for everyone
- 2022-06-14 21:07:00下载
- 积分:1
-
单片机c51系列控制74h595移位寄存器驱动LED显示
单片机c51系列控制74h595移位寄存器驱动LED显示-C51 Series 74h595 Singlechip control shift register drives LED display
- 2022-12-26 06:25:03下载
- 积分:1
-
ADC0809做的数字电压表,0
ADC0809做的数字电压表,0-5V,4个LED直接接单片机做显示,动态扫描写的驱动-ADC0809 do the figures in Table 0-6 voltage- 5V, 4 LED SCM done directly, dynamic scan was driven
- 2023-07-30 23:05:02下载
- 积分:1
-
sed1520 122* 32 dot
sed1520的122*32点阵液晶驱动的单片机程序-sed1520 122* 32 dot-matrix LCD driver of SCM procedures
- 2022-05-27 06:36:59下载
- 积分:1
-
C8051F MCU using milling machine model (straight line circular interpolation alg...
利用C8051F单片机控制的铣床模型(直线圆弧插补算法)-C8051F MCU using milling machine model (straight line circular interpolation algorithm)
- 2022-01-22 04:05:04下载
- 积分:1