bootloader_test

Linux下的以太网驱动，很不错，内容挺多，支持嵌入式。大家交流用。-Ethernet driver under Linux, it is true that the contents of挺多to support embedded. Used to facilitate the exchange.

These patch files are supplied as part of ADS 1.2.1.

此为讲解内存技术的文档资料，感觉做嵌入式的此为必修课-A ducument for explaining memory technology,it is a required course for who use embedded system.

嵌入式处理器arm的启动代码，使用范围较广-Embedded processor arm of the startup code, the use of a wider scope

此程序为串口芯片tl16c750在uClinux + s3c44b0环境下的驱动程序.tl16c750R FIFO设置为64BYTES, 除此之外,此程序还能缓存20条已经收到的串口数据.即存储数据量为20*64=1280BYTES的串口数据,而不用担心未及时读串口时发生数据的丢失现象.此外,附此驱动的测试程序,以及编译后的映像文件.-procedure for the serial port chip tl16c750 uClinux s3c44b0 environment of flooding action procedures. tl16c750R FIFO set to 64 BYTES, in addition, This procedure can cache 20 has been received by the serial data. that the data storage capacity of 20* 64 = 1280BYT ES Serial data, and do not have to worry about failure occurred when reading serial data loss phenomenon. In addition, Report this driver testing procedures, and compile the map file.

这是支持MF RC500 MIFARE 读写集成电路IC的有关射频设计的应用笔记。意在提供对MIFARE 射频接口（ISO 14443A）所需的理解来设计具体天线应用和匹配电路，为了使无接触MIFARE卡通信有最优表现。本文给出了系统的RF部分背景，以及如何为标准应用设计和调试天线的过程概述。详细说明了两种不同的天线和匹配概念以及它们的设计实例。还描述了完整的调试天线的步骤。作为附件的一部分，有兴趣的读者会发现RF接口的详细理论描述-This is to support reading and writing IC MF RC500 MIFARE RF IC design of the Application Notes. Intended to provide MIFARE RF Interface (ISO 14443A) designed to understand the requirements of specific applications and antenna matching circuits, in order to make contactless MIFARE cards have the best communication performance. In this paper, the RF part of the background of the system, as well as standard application for the design and debugging process of an overview of the antenna. Detailed description of the two different concepts of antennas and matching, as well as their design. Also a complete description of the steps to debug the antenna. As part of the annex, interested readers will find the detailed theory of RF Interface Description

应用程序描绘了一个两路声音通讯在主和从之间，通过CC1110和TLV320AIC26芯片-This application note describes a two-way audio communications link between a ‘Master’ and a ‘Slave’, based on the Texas Instruments CC1110 or CC2510 Systemon-Chip Low Power RF Transceiver ([1]and [2]) and the TLV320AIC26 Codec [5]. Use is made of the μ-Law compression/expansion algorithm implemented in CC1110 (CC2510) hardware.

基于ARM7的无纸记录仪的U盘读写方法(请多指教）-ARM7-based Paperless Recorder U-disk read and write methods (please advise)

line.cpp line.h line.png main.cpp mainwindow.cpp mainwindow.h .......

* Arduino Library for OBD-II UART Adapter * Distributed under GPL v2.0 * Copyright (c) 2012~2013 Stanley Huang