symbian平台，nokia s60上网络收音机的源代码

HCS08仿真器资料：资料详细，完全可参照自己制作。-HCS08 emulator information: information in detail, with reference to fully produce their own.

最新的HD7279(c语言)驱动程序含有两个按键驱动程序及测试函数，多种时钟制做--Latest HD7279 driver C program. It includes 2 keyboard drivers and testing functions.

宏晶科技用c语言实现的EEPROM完整底层驱动程序，包括擦除、读写，flash保护等-Acer crystal technology with c language realize the underlying integrity of the EEPROM driver, including erase, read and write, flash protection

在89C51芯片上运行，采用两个中断方式，一个外部0中断实现救护车通行，南北红灯10秒后恢复中断前状态，另一个是定时器0中断实现南北灯状态转换，16X16 LED点阵对应显示“南北”字样信息-89C51 chip in operation, interruption of the use of two methods to achieve an external 0 interrupt the passage of ambulances, the North-South red light 10 seconds after the resumption of state, and the other is the timer 0 interrupt to achieve the state of North-South light conversion, 16X16 LED dot-matrix corresponding show " South-North" in the information

一个电表的程序，给大家一个借鉴，本人请仔细阅读才能体会-a meter process, a reference to you, I can read carefully Experience

cpci程序 根据cpai协议编写的测试程序-CPCI cpai procedures under the agreement prepared by the test procedure

用verilog写的对OCMJ2X8液晶模块控制代码，显示汉字和数字-Written using Verilog OCMJ2X8 LCD module on the control code indicating the number of Chinese characters and

DA 转换 产生三角波 正旋波 梯形波（dac0832)换电路接成同相电压输出形式，其输出电压Vout=IR(1+R2/R1)。-DA conversion triangular wave generated spinning wave trapezoidal wave (dac0832) for access into the same circuit phase voltage-output type, the output voltage Vout = IR (1 R2/R1).

X5045的底层驱动，可以正确运行无误，经过测试，欢迎下载-X5045 underlying driver, you can run the correct accurate, tested, welcome to download

DS1820 TO USB, DS1820 TO USB-DS1820 TO USB, DS1820 TO USB, DS1820 TO USB