配电变压器负荷监测与控制系统数据监测传输，规约解析等

用于ucos移植的一个小程序，应该会对大家有用-For ucos transplant a small program, it should be would be useful for everyone

此例程运行于内RAM > 1024 Byte的51内核的单片机即可。 比 如 ： SST89E564RD ,STC89C516RD 等 移植ucosii，本例程一共创建了3个任务，任务一开led1,任务二开LED2，任务3关闭led1和led2，并且运行到相应的任务，串口会打印出来，提示当前系统运行的状态。(This routine runs on a single chip computer with 51 cores of RAM > 1024 Byte. For example, SST89E564RD, STC89C516RD and so on For uCOSII, 3 tasks are created in this routine, the task is LED1, task two opens LED2, task 3 closes LED1 and LED2, and runs to the corresponding task, the serial port will be printed out to prompt the state of the current system running. This routine runs on a single chip computer with 51 cores of RAM > 1024 Byte. For example, SST89E564RD, STC89C516RD and so on For uCOSII, 3 tasks are created in this routine, the task is LED1, task two opens LED2, task 3 closes LED1 and LED2, and runs to the corresponding task, the serial port will be printed out to prompt the state of the current system running.)

这是基于UCOS的LCD显示驱动，LCD为RGB+SPI模式。希望对大家有用。(This is LCD driver based on UCOS，the model of LCD is RGB+LCD.Wish help for you。)

嵌入式系统设计与实例开发-基于ARM微处理器与ucosii实时操作系统（王田苗）-Embeded system design and development base in arm microprocess and ucosii RTOS(TIANMIAO WANG)

ucos实时操作系统移植的讲解，可以参照移植到ARM处理器中-ucos real-time operating system migration talks, can refer to transplanted into the ARM processor

UC/OS 的移植，以及驱动两个task，分别完成lcd的驱动，以及LED的驱动-UC/OS-graft, as well as drive two task, respectively lcd driver, as well as LED driver

说明：  uc/os在c167上的移植代码，tasking编译器(This file includes the uc/os source code for the port to c167, and tasking compiler)

ucos移植到arm_s3c2410的全套代码-uCOS arm_s3c2410 transplanted into a complete set of code

基于ucos的7段式led显示程序。可以方便的移植到不同的平台。能够任意位置显示。-Based on the 7-piece ucos display program led. Can be easily ported to different platforms. Be able to show anywhere.

对操作系统引导探究，研究操作系统的引导过程。-guide to the operating system to inquire, to guide the research process of the operating system.