44B0 experiments related to code, very good! Matching the experimental configura...

进行arm－linux嵌入式系统开发时，需要将文件烧写到flash上，在网上可以找到win下的烧写程序，但多数情况下开发环境应该是在linux下，烧写程序时切换到win下很不方便，使用该程序可以在linux下直接对flash进行烧写 该程序运行后将一个小的for arm的c程序通过串口传送到arm开发板上，使用该小程序与主机端通信，将主机传送信息烧写到flash上- Carries on when arm- linux inserts the type system development, needs the document fever to write on flash, is on-line may find under win the fever to write the procedure, but in the most situations the development environment should be under linux, the fever writes when the procedure cuts under win not to be very convenient, uses this procedure to be allowed directly to carry on the fever under linux after flash to write this procedure movement to transmit orally a small for arm c procedure through the string delivers on the arm development board, uses this script and the main engine end correspondence, writes the main engine pass-along message pam fever on flash

s3c44b0,USB HOST实验，插入U盘或其他USB设备，会从串口打印出相关信息。-s3c44b0, USB HOST experiment, the U-insert or other USB devices, from the serial print out relevant information.

tcpip_mcu_arm

用于控制codec的iic源码，譬如SAA7105或saa7115等codec芯片。-IIC codec is used to control the source, for example, or the SAA7105 chip saa7115 and other codec.

ARM S3C2410处理器 rtc驱动程序 开发环境：ads1.2-ARM S3C2410 processor rtc driver development environment: ads1.2

ZLG LPC 2100 新easyARM2100光盘-ZLG LPC 2100 new easyARM2100 CD-ROM

ES44b0开发板的LCD驱动程序，完整的SDT下的工程文件，已成功运行。-ES44b0 development board LCD driver, SDT integrity of the documents under the project, has been successfully operated.

arm_7x256的ADS1.2的网络测试程序-arm_7x256 the ADS1.2 network test procedures

14 codes for 2812 examples

S3C2410上GPRS模块的驱动源码,ADS1.2编译工程,已测试通过.附文档.-S3C2410 on GPRS module driver source, ADS1.2 compiler works, have been tested. Attached document.