自制AT89S51编程器教程 编程器制作包 1.1 修正了电路两处错误。 编程器制作包 1.2 增加了一个下载线调试程序...

用于无线POS 数据传输的原程序。通过调制解条芯片实现-POS data for wireless transmission of the original procedure. Solutions through modulation of the chip

基于STC5410单片机的温度控制报警程序-STC5410-based single-chip temperature control of the police procedures

系统can地址为550,用于can系统测试,应用T0定时器每隔1s向can总线发送一组数据:数据长度为8个字节, 首字节为05H,第二个字节为累加变量,每秒钟数值增加1,-system can address 550 for the test system can, Application T0 1s to every timer can send a bus of data : data length of 8 bytes the first byte of 05H, the second byte of cumulative variable, an increase in value per second.

这是由C51单片机实现的接触式IC卡的读写-This is achieved by the C51 single-chip contactless IC card read-write

中断串口程序-interruption procedures

基于HS108设计的红外水位检测仪，内含C源代码，原理图及PCB，稍作改动可以用于很多位置检测场合如油泵位置检测等。-HS108-based design of infrared detector water containing C source code, schematics and the PCB, to make a minor amendment can be used for position detection in many occasions, for example, pumps and other position detection.

在ADS编译环境以及keil-ARM这两种编译环境下通用的arm-core头文件，并用金鹏串行12864进行验证，用此arm-core开发程序可以不受编译器头文件缺少的限制-In the ADS environment and compiler keil-ARM compiler environment of these two common arm-core header files, and verify Jinpeng serial 12864, with the arm-core development programs can not be the first document of the lack of compiler restrictions

STC12c5410AD PWM

51单片机模拟串口SPI方式接收和发送数据-51 single-chip analog SPI serial receive and send data

用单片机构成高精度PWM式12位DA，网上下的，很实用。-with high accuracy microprocessor PWM 12 DA, the Internet and practical.