Detailed introduction of the MSP430 MCU c language programming, there are many e...

avr单片机的串口通讯程序，用c语言编写，值得参考-avr MCU serial communication procedures, using the c language, worthy of reference

芯片PCF8951共有四个A/D输入通道：AD0，AD1，AD2，AD3,分别与四个电位器(R1,R2,R3,R4)连接，用以调节电位器的输出电压。其中AD0通道既可测量电位器输出电压，也可用于测量从J1插座输入的外接电压，须用开关J2加以选择。J4插座提供由PCF8591输出的时钟方波信号。SAA1064驱动四个数码管显示一路AD转换后得到的数据。-PCF8951 chip, there are four A/D input channels: AD0, AD1, AD2, AD3, respectively, with four potentiometers (R1, R2, R3, R4) connected to regulate the output voltage potential. AD0 channel which can be measured potentiometer output voltage can also be used to measure the input from the J1 socket external voltage, to be used to select switch J2. J4 socket output from the PCF8591 clock square wave signal. SAA1064 drivers of four digital display along after AD conversion data.

TMX320TCI6482 电路图，很难得才弄到！-TMX320TCI6482 circuit, it is difficult to have to get before!

1602A 显示的英文句子。实验板上已通过-1602A

一款12F629的信号发生器的源程序，非常详细，对用PIC的朋友有帮助-12F629 a source of the signal generator, very detailed, using PIC friends have to help

开发c51系列产品，用来驱动读写AT24C512芯片的。-C51 family of products developed for the drive to read and write AT24C512 chips.

基于keil c51的rtos tiny源代码（keil 7.05 version）-based on the Byelorussian tiny decoder source code (c51 7.05 version)

这是一个51单片机与PC的通信系统：利用3*4小键盘输入0~9的一串数字（不大于5），通过8051自带的串口发送给PC并显示在系统的6位LED上；单片机接收上位机的输入并显示在LED上。8051串行口经232电平转换后，与PC机串行口相连。PC机使用串口调试应用程序V2.2.exe，实现上位机与下位机的通讯。-This is a 51 microcontroller and PC communication system : use 3* 4 0 small keyboard input of a bunch of nine-figure (no more than 5), by 8051, bringing their serial sent to the PC and display system in the six LED; SCM receiving PC input and displayed on the LED on. 8,051 by 232 serial port-level conversion, and the PC serial port connected. PC using serial debugging applications V2.2.exe achieve PC and the next crew communications.

PICKS0108图形液晶驱动程序C源代码，编译为PICC18

条形电子屏的源代码，使用keil c51编译。-strip electronic screen source code, the use of c51 Keil compiler.