单片机贪吃蛇游戏,可在89c51等单片机运行. keil编译

一个Reedmuller（1,7）实现基于ARM的STM32F407单片机上的实现。全进口的项目并编译使用GCC ARM工具链在Eclipse。该代码被广泛评论为编码和解码阶段；

这是本人做的模数转换，分为四个模块，最终输出为两个信号的4位二进制结果，其中采样后的为补码，所以本人转化为原码。这些模块可以根据需要更改。

基于Keil+HJTAG+LPC214x的（Human Interface Device）HID类USB开发例程，不需要驱动，烧入直接可识别。程序有注释，可根据需要更改。-Based on Keil+ HJTAG+ LPC214x the (Human Interface Device) HID type USB to develop routines, do not need to drive, burned into the direct identifiable. Procedures have the Notes may be in need of change.

AT91SAM7S64_debug.rar-AT91SAM7S64调试笔记-AT91SAM7S64_debug.rar-AT91SAM7S64 Debugging Notes

基于S3C2440，一个LED灯的驱动程序。-Based on S3C2440, an LED lamp driver.

2812使用spi读写fm25cl64或者at25640的程序，已经测试通过。注意在在eeprom的datasheet中都写只支持spi的0或者3模式，但我用0模式一直调不通，改用spi模式才可以，程序中就是使用spi的1模式。-2812 to read and write using spi or at25640 procedures FM25CL64 have the test. Attention to the datasheet in the EEPROM are write only support spi mode 0 or 3, but I used the 0 model has been adjusted barrier before they can switch to spi mode, process is the use of one mode of spi.

通常我们需要将板上的Flash芯片拆下，用Flash编程器烧写固件程序；这个程序可以通过CCS运行Emu模式直接将程序烧写到flash芯片中。-Usually we need to board the Flash chip removed, Programming with Flash burning device firmware procedures; This procedure can be run through the CCS model Emu directly to the process of burning flash chip.

这是一个用于创建多线程的程序，用法简单，内有例子，开消非常小，适合用于较低性能cpu上如51，arm7-This is a used to create multi-threaded program, usage is simple, there are examples, the extinction is very small, suitable for low performance on the cpu, such as 51, arm7

这是我调试44B0ARM7开发板有关中断的心得。对学习ARM 的朋友很有帮助。-This is my development board debugging 44B0ARM7 experience the interruption. ARM s friends helpful in learning.

接上回。以太网物理层测试代码-connected back. Ethernet physical layer test code