Dynamic_LS_CMA

当当网项目北大青鸟s1项目-html project

115.2k串行口通信程序，校验方式为简单双向校验,而且是必要的，因为任何采用中断、crc等的方法均很难保证速度和避免错误. 总体速度5KB/秒 -115.2k serial port communication procedures and testing methods for the simple two-way check, but is necessary, Any interrupt, crc the methods are difficult to ensure that the speed and avoid mistakes. the overall rate of 5 KB/sec

模拟Maya模型的交互式控制，可通过左右方向键控制人物旋转，上下方向键控制步行-Maya simulation model of interactive control by about key figures rotary control, The next key control walking

求解弹流润滑的方程组程序，得到压力、膜厚分布(Solve the equation of the elastohydrodynamic equation and obtain the pressure and film thickness distribution)

ORACLE的开发和使用-the development and use

切换效果很炫的Flash图片展示，可作为Flash相册来用，右下角的小方块既是控制按钮，点击后是一种百叶窗形式的图片切换，图片在image文件夹下，把图片按照1,2,3,4,5的形式命名放在image里，Flash就可直接调用。

用Ｃ语言编写的用户注册登陆以及修改密码的程序原代码-err

实验器材: 探索者STM32F4开发板 实验目的: 学习DS18B20数字温度传感器的使用. 硬件资源: 1,DS0(连接在PF9) 2,串口1(波特率:115200,PA9/PA10连接在板载USB转串口芯片CH340上面) 3,ALIENTEK 2.8/3.5/4.3/7寸TFTLCD模块(通过FSMC驱动,FSMC_NE4接LCD片选/A6接RS) 4,DS18B20传感器一个(接在PG9上). 实验现象: 本实验开机的时候先检测是否有DS18B20存在，如果没有，则提示错误。只有在检测到DS18B20之后才开始 读取温度并显示在LCD上，如果发现了DS18B20，则程序每隔100ms左右读取一次数据，并把温度显示在LCD 上。同样我们也是用DS0来指示程序正在运行。(Experimental equipment: Explorer STM32F4 development board Objective: Learn the use of DS18B20 digital temperature sensor. Hardware resources: 1, DS0 (connected to PF9) 2, serial port 1 (baud rate: 115200, PA9/PA10 connection on board USB to serial port chip CH340). 3 inch TFTLCD ALIENTEK, 2.8/3.5/4.3/7 module (via FSMC driver, FSMC_NE4 LCD chip select /A6 RS) 4, one of the DS18B20 sensors (attached to PG9). Experimental phenomena: This experiment first detects whether there is DS18B20 when starting up. If not, it prompts errors. Only after the detection of DS18B20 did it begin Read the temperature and display it on LCD. If DS18B20 is found, the program reads data once every 100ms or so and displays the temperature at LCD. On. Similarly, we also use DS0 to indicate that the program is running.)

学习资料，通过代码示例学习代码重构和规范，适合团队学习(Learning materials, learning code refactoring and specification through code examples, are suitable for team learning)

说明：  IE浏览器下是将内容复制到Excel，需用户手动保存Excel文档 非IE浏览器可直接导出Excel文件(In IE browser, the content is copied to excel, and the user needs to save the excel document manually)