831551

这是看完一本通信仿真手册后我自己写的一点程序，包括ASK FSK PSK的调制和解调程序，不过是比较简单的 ，因为用了公式的()

半带滤波器，工作在采样率122.88Msps上(Half-band filter, working at the sampling rate of 122.88 Msps)

说明：  近两天由于研发需要OPNET这个仿真软件，同时要求可以支持wimax仿真模型，对该仿真软件的研究还需要继续进行 好不容易在网络上找到了最新版的OPNET 14.5的软件，但是安装的确出现了很大的麻烦，最后通过查阅网络上对之前版本安装的经验解决了安装过程中的问题，因此将这些分享给大家： (Almost two days because of this R &amp D needs OPNET simulation software, also required to support wimax simulation model, the simulation software is also the need to continue the network finally found the latest version of the OPNET 14.5 software, but certainly there was an installation much trouble, and finally access to the network through the installation of the experience of the previous version to solve the problems during the installation process, it will share all of these:)

parse to check whether there is separator in the numberStylePattern.

循环谱代码，应用于盲分离信号处理。非常适用于初学者，代码完整，仿真结果正确。(Cyclic spectrum code)

绝对原创代码，目前正在产品上应用。基于NXP的LPC2220的串口升级程序，在PC端用VC++ 6.0编写，对于ARM7特别是IAP升级具有很好的参考价值。(Absolute original code, and is currently being applied on products. Based on NXP' s LPC2220 serial upgrade, in the PC side using VC++ 6.0 to prepare for the ARM7 particular IAP upgrades have good reference value.)

不同信号的循环谱（AM,BPSK,BFSK,DME等）可以直接使用，来分析信号的循环平稳特性。(The cyclic spectrum of different signals (AM, BPSK, BFSK, DME, etc.) can be directly used to analyze the cyclostationary characteristics of signals.)

二进制格雷码与自然二进制码的互换 它就是介绍怎么把二进制格雷码与自然二进制码的互换。主要是异或操作(itis to for 2to 2)

说明：  完整的Verilog验证模型，包括设备完整的状态。(Complete verilog Verification Model)

说明：  SAR雷达的BP后向投影成像，可运行出结果(The BP back projection imaging of SAR radar can run the result)