16x16-Chinese-word

凌阳单片机实验设备与配套模组\模组资料SPLC501液晶显示V2.1SPLC501DemoCode(Single-chip Sunplus test equipment and complementary modules module data SPLC501 LCD V2.1 SPLC501DemoCode)

基于430单片机的数字万用表，可以测来量电阻、电流、电压。精确度达0.1 (Based on 430 single chip digital multimeter, can be measured to the amount of resistance, current, voltage. An accuracy of 0.1 )

1、本程序的前提是CS引脚接地，基准电压设定为1.372V 2、“data=temp*4096/2.745”语句是为了实现将所需输出的模拟值直接转化为编码，减少计算量 3、TLV5616最大输出电压是基准电压的两倍，输出电压最大范围是0~Vdd-0.1V,另外基准电压的输入范围为0~Vdd-1.5V(TLV5616文档中有注明，使用时请注意) (1, the premise of this program the CS pin grounded, the reference voltage is set to 1.372V 2, "data = temp* 4096/2.745" statement is in order to achieve the desired output of the analog values ​ ​ are converted directly to the coding, to reduce the amount of calculation 3, TLV5616 maximum output voltage is twice the reference voltage, the output voltage range is 0 to Vdd-0.1V, another reference voltage input range of 0 to Vdd-1.5V (of the TLV5616 document has stated, use note ))

功能有：功能模式选择，功率调节，定时，LED指示灯，无锅具检测，小物件检测，超温保护，干烧保护，过流过压检测，2小时自动关机功能，故障报警检测及保护代码(function : Function mode selection, power conditioning, regular, LED indicator light, no pans detection, detection of small objects. Over-temperature protection, and dry protection, over-voltage flow detection, automatic two-hour shutdown function, fault detection and alarm protection code)

51单片机的eeprom和iic通信软件模拟程序(Eeprom and IIc communications in 51 single chip machines)

说明：  乾勤TC275开发板例程,Capture/Compare Unit 6 (CCU6)模块(Qianqin TC275 DEMO,Capture/Compare Unit 6 (CCU6)demo)

AVR ATmeg16单片机的串口通信,这个程序非常实用，发送采用查询方式，接收采用中短方式。(This pramer is very good，it can transmit your massage you press on the software of PC.Try it and like it.)

说明：  keil c usb数据采集系统 at89c5131的固件源代码 及生成软件 支持3个端点 0.1.2(keil at89c5131)

51单片机红外解码（1）采用脉宽调制串行码，以脉宽为0.565ms，间隔0.56ms，周期为1.125ms的组合表示二进制的“0” （2）一脉宽为0.565ms，间隔1.685ms，周期为2.25ms的组合表示二进制的“1”(51 MCU infrared decoder (1) uses pulse width modulation serial code. The combination of pulse width 0.565 ms, interval 0.56 MS and period 1.125 MS represents the binary "0" (2) pulse width 0.565 ms, interval 1.685 MS and period 2.25 MS represents the binary "1".)

基于STC89C52RC的单片机的PWM电机调速(STC89C52RC microcontroller-based PWM motor control)