USTM

本论文以OFDM系统为基础，介绍了OFDM系统的基本原理，以及使用OFDM技术的优势所在，并且展望了今后的无线移动技术的发展前景。在简单介绍OFDM原理的同时，着重阐述了OFDM系统在不同信道环境和不不同实现方式下的误码性能。主要包括了OFDM系统在加性白高斯信道，在加性白高斯信道和多径干扰两种不同信道环境下系统的误码性能，其中后者还研究了系统在有保护间隔与无保护间隔的误码性能比较。在理论分析的基础 (This thesis is based on the OFDM system, the basic principle of the OFDM system, as well as the advantages of using OFDM technology, and future prospects for the development of future wireless and mobile technologies. OFDM principle in brief, focusing on the BER performance of OFDM systems under different channel conditions and different implementations. Including OFDM system in additive white Gaussian channel, additive white Gaussian channel and multipath interference of two different channel environment, the system BER performance, the latter of which also studied the system in a protected interval without guard interval BER performance comparison. The basis of theoretical analysis)

Implementation of Adaptive Modulation and Coding Techniques using Matlab

多输入多输出系统不同收发天线对系统性能的影响(Multiple-input multiple-output system transceiver antenna different impact on system performance)

一种基于LFM和Barker码复合调制的雷达波形，理论上分析了该低截获雷达波形的组成。通过仿真得到复合调制信号的时域波形、频谱图和模糊函数图，与LFM信号和Barker码信号对比分析对复合调制雷达信号的距离和多普勒模糊函数、截获因子等进行了研究。(A radar waveform based on LFM and Barker code modulation is presented. The composition of the waveform is analyzed theoretically. The time domain waveform, spectrum and ambiguity function of the compound modulation signal are obtained by simulation. The range and Doppler ambiguity function and interception factor of the compound modulation radar signal are studied by comparing with LFM signal and Barker code signal.)

说明：  这是自由空间路径损耗的代码。里面有多个m文件(This is the code of path loss in free space. There are multiple M files in it.)

说明：  基于ofdm的信道估计算法LS算法，与没有信道估计的情况作了对比。(Ofdm-based channel estimation algorithm LS algorithm, compared with no channel estimation.)

说明：  产生FM信号，并利用锁相环的载波同步对信号进行跟踪并解调(FM signal is generated, and the carrier synchronization of PLL is used to track and demodulate the signal)

gsm11.11 gsm11.14规范，用于gsm 的开发(gsm11.11 gsm11.14 norms for the development of gsm)

说明：  1、基带码型仿真 （1）通过仿真观察占空比为50%、 75%以及100%的单、 双极性归零码波形以及其功率谱，分析不同占空比对 仿真结果的影响。 （2） 通过仿真产生一随机消息码序列，将其分别转换为 AMI码和HDB3码，观察它们的波形及其功率谱密度。 2、数字带通调制系统仿真 设计一个采用2ASK（ OOK） 调制的数字通信系统： 产生二进制随机数据，并仿真其对应的2ASK调制波形， 分析其频谱。所产生的调制波形加入不同信噪比的白噪声， 选取合适的接收方案，画出系统误码率曲线，并与理论误 码率进行对比。(1.Baseband pattern simulation 2. Simulation of digital band-pass modulation system)

This book is very nice for designing a wireless network which describes in details how the wireless systems are designed.