Clixgrid Addon v5.x

1. 硬件接线 （1）调试串口(UART_Debug)使用UART2，在“printf.h”文件中宏定义， 对应引脚为TX-PTD7，RX-PTD6 （在“uart.h文件中宏定义）。 （2）灯0~3（LIGHT_0~LIGHT_3）对应的引脚是PTC0~PTC3，高电平点亮（由硬件接法决定） （3）SPI0_CLK对应的引脚是PTE0， SPI0_MOSI对应的引脚是PTE1， SPI0_MISO对应的引脚是PTE2，SPI0_PCS对应的引脚是PTE3， SPI1_CLK对应的引脚是PTG4， SPI1_MOSI对应的引脚是PTG5， SPI1_MISO对应的引脚是PTG6，SPI1_PCS对应的引脚是PTG7。 （4）SPI0作为master,SPI1作为slave，SPI1接收SPI0发送的数据并产生中断。 用导线将PTE0与PTG4对接，将PTE1与PTG5对接，将PTE2与PTG6对接，将PTE3与PTG7对接。(1. Hardware wiring (1) Debugging Serial Port (UART_Debug) uses UART2, macro-defined in "printf.h" file, corresponding pins are TX-PTD7, RX-PTD6. (macro definition in the uart.h file). (2) The pins corresponding to the lamp 0~3 (LIGHT_0~LIGHT_3) are PTC0~PTC3, and the high-level lighting is determined by the hardware connection. (3) The pin corresponding to SPI0_CLK is PTE0, and the pin corresponding to SPI0_MOSI is PTE1. The pin corresponding to SPI0_MISO is PTE2, and the pin corresponding to SPI0_PCS is PTE3. The pin corresponding to SPI1_CLK is PTG4, and the pin corresponding to SPI1_MOSI is PTG5. The pin corresponding to SPI1_MISO is PTG6, and the pin corresponding to SPI1_PCS is PTG7. (4) SPI0 acts as master and SPI1 acts as slave. SPI1 receives data sent by SPI0 and generates interruption. PTE0 and PTG4 are docked by wire, PTE1 and PTG5 are docked, PTE2 and PTG6 are docked, PTE3 and PTG7 are docked.)

说明：  光谱数据预处理 超级全 都可以用 自己用的(Spectrum data preprocessing)

十二音阶和八度分频的硬件描述语言VHDL程序，测试通过成功-12 sub-octave scale and frequency of the hardware description language VHDL procedures, test the success of

利用MATLAB稳定求解高精度二维对流扩散方程(Solving High Precision Two-Dimensional Convection-Diffusion Equation with MATLAB)

三相交错双向DCDC MATLAB 模型仿真(Three-phase staggered two-way DCDC MATLAB simulation)

dds->9954的pcb供大家参考,这个扳子我调通了的可以放心开办-dds-

Clock on Alphanumeric LCD

数据结构与算法,,~~清华大学c语言版~~~~~ 很不错的哦!-data structures and algorithms, Qinghua University, c ~ ~ language version titled very good oh!

介绍鼠笼式交流异步电动机在正弦电压下的工作情况，异步电动机连接正弦电压工作。(Asynchronous motors work with sinusoidal voltage.)

实现双向读卡输出的门禁控制器程序，可用于需双向读卡进出的场合，也可同时控制相距较近的两个门。