quanqiao-dcdc_uc3875

Obj tracker for detection. Choosing a set of pixels using the square to complete what is called the object marking and lets you know of the pixels there

Code GPS to LCD By C code

说明：  RTL8019网卡芯片源码,TCP/IP源码,包括TCP.C,UDP.C,IP.C(RTL8019 LAN chip source, TCP/IP source code, including TCP.C, UDP.C, IP.C)

说明：  cc3200的socket编程实例，协议是自定义，主要是socket初始化！(cc3200's socket programming example, the protocol is custom, mainly socket initialization!)

arm lpc2138 basic programs for beginers

简单数字钟的编写，实现日期时间温度闹钟还有继电器的控制(The preparation of a simple digital clock, date and time to achieve control of the temperature alarm relays are)

这是一个模拟时钟的小程序，其中仿真时钟出来的波形还是很不错的，能达到设计的要求。(This is an analog clock applet, which the simulation clock waveform is still very good to meet the design requirements.)

本程序实现如下功能：开机后，先初始化MPU6050等外设，然后利用DMP库，初始化MPU6050及使能DMP，最后，在死循环里面不停读取：温度传感器、加速度传感器、陀螺仪、DMP姿态解算后的欧拉角等数据，通过串口上报给上位机（温度不上报），利用上位机软件（ANO_Tech匿名四轴上位机_V2.6.exe），可以实时显示MPU6050的传感器状态曲线，并显示3D姿态，可以通过KEY0按键开启/关闭数据上传功能。同时，在LCD模块上面显示温度和欧拉角等信息。DS0来指示程序正在运行。(This program implements the following functions: boot, first initialize MPU6050 and other peripherals, and then use the DMP library initialization MPU6050 and enable DMP, finally, in an endless loop which constantly reads: temperature sensors, acceleration sensors, gyroscopes, DMP attitude Euler angles and other data solver after reporting to the host computer through the serial port (temperature does not report) using PC software (ANO_Tech anonymous axis PC _V2.6.exe), it can display MPU6050 sensor status in real-time curve, and displaying 3D gesture by KEY0 button on/off data uploading. Meanwhile, in the LCD display above the module temperature and other information Euler angles. DS0 to indicate that the program is running.)

利用51单片机控制红外射线的接收 利用红外遥控器发送红外线  将程序烧录到51单片机中  当接收到红外信号时  就会在于51单片机相连的数码管上显示红外射线相应的数字

C8051f120的AD程序，调节电位器控制八个led灯的亮灭和闪烁频率(C8051f120 the AD process, adjust potentiometer control eight led lights out and flicker frequency)