ARM7_LPC23xx

ARM M3 STM32F2xx 库文件源代码，是STM32F2xx开发必备的 (Library files source code, is STM32F2xx development essential)

一块TFT屏幕的驱动程序，包括管脚的定义以及纵横方向的延展，但是没有具体的数据cmd，需要的拿走(A driver for TFT)

stm32 ADC访问驱动，需要硬件抽象接口进行访问。(stm32 ADC access the drive, the need to access hardware abstraction interface.)

用stm32测量血氧饱和度和心率。传感器为max30102。在oled上显示。效果较好(Blood oxygen saturation and heart rate were measured by stm32. The sensor is max30102. Display on oled. get a good effect.)

Embedded System Application Development and Labs Textbook is compounded with the Embest ARM Development System that was developed by Embst Inc. at Shenzhen, China. Any reader who is interested in using the Embest development tools for ARM can contact Embest Inc. The following is the Embest contact information

说明：  CAN总线协议，具体阐述了CAN总线的协议以及如何进行二次开发。(CAN bus protocol, specific CAN bus protocol and how to carry out secondary development.)

基于STM32的bootloader,应用Xmode协议。可远程升级应用程序APP(IAP)，无需直接连接芯片。(Based on the STM32 bootloader, use Xmodem protocol. You can remotely upgrade the application APP (IAP), without direct connection chip.)

arm扩展can总线的驱动程序(arm can extend Bus Driver)

镁光公司NANDFlash的NFTL代码，包含坏块管理、读写平衡以及ECC校验等部分。(Micron company NFTL NANDFlash code, including read and write bad block management, balance and ECC check and other parts.Micron company NFTL NANDFlash code, including read and write bad block management, balance and ECC check and other parts.)

说明：  用stm32处理器，采集MPU6050六轴传感器的值(Collect the value of mpu6050 six axis sensor)