NRF24L01P--51-avr

简单的流水灯程序，另外包括按键控制led灯程序，适合初学者(Simple water lights, led lights additionally includes key control procedures, suitable for beginners)

AVR单片机模拟串口程序_C语言（代表一个定时器和两个IO）(AVR microcontroller simulation serial process _C language (representing a timer and two IO))

this program for student. toturial for gpio stm

奥斯电子zigbee无线传输点亮LED灯的源代码(zigbee wireless lighting source)

涵盖温控调速散热器所有源代码！哈尔滨工程大学；经典实用。(All source code to cover the thermostat governor radiator! Harbin Engineering University classic and practical.)

使用方法： 程序设置了ENC28J60的IP为192.168.0.15，模块通电后与电脑的网口用网线连接起来， 设置电脑的本地IP为192.168.0.**（**自定），网关为192.168.0.15,其他默认，配置 成功后便可以arp或ping模块。 打开浏览器，在地址里输入http://192.168.0.15/123456可打开开发板简单网页，页 面上通过按键来控制开发板LED的亮灭。(Use: setup the ENC28J60 of IP to 192.168.0.15, the module is powered on the computer' s Ethernet port using a cable connection up to set the computer' s local IP 192.168.0.** (** Custom), the gateway 192.168.0.15, default configuration is successful, it will make arp or ping module. Open the browser, enter the address http://192.168.0.15/123456 to open the development board simple web pages, and page keys to control the development board LED light off.)

由单片机8951来控制 c语言编写 具有实现正转反转 加速减速 采用PWM调制的方法(By the single-chip microcomputer to control the 8951 with c language implementation is to accelerate the slowdown in the use of inverted PWM modulation method)

一个以太网帧解析程序，实现以下功能：解析已封装好的Ethernet V2.0帧封装文件（见附件），判断有多少个帧，每个帧的所有字段内容，检测CRC校验是否正确(An Ethernet frame analysis program, the following functions: parsing the encapsulated Ethernet V2.0 frame encapsulation (see annex), to determine the number of frames, each frame contents all fields to detect CRC checksum is correct)

MSP430F5529驱动DHT11,并用带字库的JLX12864显示(MSP430F5529 driver DHT11, and use the font JLX12864 display)

利用kinect获取原始的音频波形，得到四声道的pcm波形。(Use kinect to get the original audio waveform, get pcm waveform four channels.)