one

51单片机开发仿真图，有图有真相，不相信就自己看，很好的，不骗你(happy new year)

说明：  单片机上电以后LCD屏上显示欢迎回家， 先验证指纹再验证密码 ，同时验证成功开锁 指纹和密码分别可以验证3次 3次都错蜂鸣器响 ，按下manage键进入管理员模式 可以修改密码 删减指纹，指纹用开关量表示(After the microcontroller is powered on, the LCD screen shows welcome home. First verify the fingerprint and then verify the password. At the same time, verify the successful unlocking fingerprint and password can verify that the buzzer rings three times and three times respectively. Press the management key to enter the administrator mode to modify the password and delete the fingerprint. The fingerprint is expressed by the switch.)

说明：  手消毒器应用，已经用于产品。是先喷消毒液；再进行手烘干。非常好奥(Hand disinfection applications, has been used for products. Is to spray disinfectant further hand drying. Very good Austrian)

STM32下的 ILI9488 320X480驱动，包含有初始化代码，代码正常运行

说明：  基于MPC5744P平台的CAN通信程序(CAN communication program based on MPC5744P)

基于AT89C51的DS18B20数字测温程序，开发环境为keil(Based on AT89C51 DS18B20 digital temperature measurement procedures, the development environment for keil)

AM2301显示温湿度并发送到串口，波特率为9600，可自己改，具体情况具体改进(AM2301Display temperature and humidity and sent to the serial port)

自动读取Felica 卡UID和Mifire 卡UID,可以作为门禁系统和考勤系统使用.(Felica card is automatically read and Mifire card UID UID, can be used as access control systems and time and attendance system.)

C8051F930 串口调试程序。用于串口输出。

STM8 SPI主机 多从机程序，编译调试通过，直接可用。(STM8 SPI主机 多从机程序，编译调试通过，直接可用)