1.-IRMCK171_IRMCS1671_R2.1.sch

pic18单片机控制tm1629驱动数码管显示 电力无功补偿(Pic18 single chip microcomputer control tm1629 drive digital tube display Reactive power compensation)

只能车中将摄像头采集的图像通过无线收发(使用行中断)(Only car of the camera images collected through a wireless transceiver (use line breaks))

parallel quicksort algorithm and implimentation

这是Small RTOS 51 在DP－51下载仿真实验仪上使用CAT24WC02驱动程序的例子。本例程序按照相应的的通讯协议接收一个数据，并将接收到的数据显示到LED数码显示器上。然后将接收到的数据写入Cat24Wc02中，再在同一位置将数据读出，并将读出的数据通过串口发送回来。通讯协议参考rtos随想曲和test.ini。 (This is the Small RTOS 51 DP-51 download simulation NG use CAT24WC 02 Driver for example. The cases in accordance with the relevant procedures of receiving a communication protocol data and receiving the data shows that the LED digital display. Then sending the data into Cat24Wc02, again in the same position will be read out data, will be read out through the serial data sent back. Communication protocol reference rtos test.ini and Capriccio.)

超再生遥控-遥控步进电机正反转AB的程序(Superregeneration Remote- remote control stepper motor program AB)

基于单片机开发的无线识别装置系统中使用的应答器程序代码(The development of microcontroller-based system using wireless identification device transponder code)

A， 单发单收，在发送状态，能够连续发送从0到99的数字； B， 单发单收，在接收状态，能够接收数据，并在数码管上正确地显示出来； C， 单发多收，在AB完成的基础上，接上多个接收设备，能够正确发送和接收 这是从站2的代码(A, single-input single in the sending state, capable of continuously transmitting a number from 0 to 99 B, single-input single in the receiving state, capable of receiving data, and display correctly in the digital tube out C, single overcharged, on the basis of AB completed, connect multiple receiving devices, capable of sending and receiving the correct code from the station which is 2)

ZB220GDNZ_PSR测控装置的IEC61850配置的icd文件(ZB220GDNZ_PSR of IEC61850)

IIc应用，AT24C512初始化，清零，存储，读取多字节存入 写入多字节(IIc applications, initialization, clear, store, read, write more bytes into a multi-byte)

驱动步进电机，旋转多次，寻找空间光强极大值初步程序(Drive stepper motor rotation several times to find space intensity maxima preliminary program)