LED

stm32开发，sd卡升级程序，仅供参考。(STM32 development, SD card upgrade program, for reference only.)

说明：  实验器材: MiniSTM32F103开发板V3版本 实验目的: 学习VS1053的使用,实现一个简单的MP3. 硬件资源: 1,DS0(连接在PA8) 2,串口1(波特率:9600,PA9/PA10连接在板载USB转串口芯片CH340上面) 3,ALIENTEK 2.8/3.5/4.3/7寸TFTLCD模块(通过GPIO驱动,连接关系见lcd.h) 4,W25Q64(SPI FLASH芯片,连接在SPI1上) 5,按键KEY0(PC5)/KEY1(PA15)/KEY_UP(PA0,也称之为WK_UP) 5,SD卡,通过SPI1连接 6,ATK-VS1053模块与STM32芯片连接关系为(请按如下接线连接Mini板和MP3模块): ATK-VS1053模块----------STM32芯片 VS_SCK ----------- PA5 VS_MISO ------------ PA6 VS_MOSI ------------ PA7 VS_RST ------------ PA11 VS_XDCS ----------- PA4 VS_XCS ----------- PA8 VS_DREQ ------------ PA12 5V ------------ 5V GND ------------ GND(Laboratory equipment: MiniSTM32F103 Development Board V3 Version The purpose of the experiment is: Learn the use of VS1053 and implement a simple MP3. Hardware resources: 1, DS0 (connected to PA8) 2. Serial port 1 (baud rate: 9600, PA9/PA10 connected on board USB to serial chip CH340) 3, ALIENTEK 2.8/3.5/4.3/7 inch TFTLCD module (driven by GPIO, connection relationship see lcd.h) 4, W25Q64 (SPI FLASH chip, connected to SPI 1) 5. Keyboard KEY0 (PC5)/KEY1 (PA15)/KEY_UP (PA0, also known as WK_UP) 5, SD card, connected by SPI1 6. The connection relationship between ATK-VS1053 module and STM32 chip is as follows (please connect Mini board and MP3 module according to the following wiring): ATK-VS1053 Module - ----- STM32 Chip VS_SCK------------- PA5 VS_MISO---------------- PA6 VS_MOSI---------------- PA7 VS_RST---------------- PA11 VS_XDCS------------- PA4 VS_XCS--------------- PA8 VS_DREQ---------------- PA12 5V--------------- 5V GND--GND)

说明：  LCD12864 ST7567驱动程序 HAL库(LCD12864 sT7567 driver HAL Library)

说明：  C51编写的AD9954芯片的控制程序，。(Control program for DDS chip AD9954.)

说明：  很好的RNDIS协议文档，从微软官方下载的(RNDIS Protocol Document)

实现单片机对DDS控制，通过键盘输入频率，并通过LCD显示。(failed to translate)

基于LM3S9B92的液晶显示图片的程序设计与实现，代码详细(Based on with LM3S9B92 the LCD display pictures Program Design and implementation of a detailed code)

MCu based distance measurement from 20-80cm based on SHARP ir sensor

arduino的12864库文件，仅适用于i2c屏幕(Arduino 12864 library file, only applies to the I2C screen)

用TM1652基于C51做的一个简单的6位显示驱动，方便移植。(TM1652 based on C51 to do a simple 6 bit display driver, easy to transplant。)