ExpressCMS.net(.net2.0PXML)

用dsp28335生成pwm波，亲测可用，包含了sin表(PWM wave is generated by dsp28335, measure available, contains the sine table)

说明：  用于FANUC系统人机界面组态，适用于界面二次开发.(Used in man-machine interface configuration of FANUC system, suitable for secondary development of interface)

STIM300高精度IMU的输出解码程序，MOD93格式，带CRC校验，直接可以运行(MOD93 format with a CRC check can be run directly)

光照模型的完整源码，内含Gouraud和phong两种明暗处理。(Complete source of illumination model, to containing Gouraud and phong two-shading.)

绝对原创，请站长加分啊，这是用来快速定位性能底下的一段测试代码，配合Quantify使用，上面附有说明，如何定位到。(Rational Quantify Usage)

iic驱动源程序(iic actuation source program )

单片机89c2051通过模拟spi口驱动nrf905，与nrf905进行联系，本程序详细描述(MCU 89C2051 drives nRF905 through analog SPI port and contacts nrf905. This program is described in detail)

这个是为了自己结婚打请贴方便而写的套打程序。没有人员输入界面，直接写到MDB里就可以了(This is a fight for their marriage of convenience please write affixed to the piling process. No officer input interface, MDB Lane wrote directly on the)

说明：  支持9600，19200等常用各种波特率及自定义波特率，可以自动识别串口，能设置校验、数据位和停止位，能以ASCII码或十六进制接收或发送任何数据或字符，可以任意设定自动发送周期,并能将接收数据保存成文本文件，能发送任意大小的文本文件。 硬件连接方面，传统台式PC机支持标准RS232接口，但是带有串口的笔记本很少见，所以需要USB/232转换接口，并且安装相应驱动程序。(Support 9600, 19200 and other commonly used baud rates and custom baud rates, can automatically identify serial ports, can set check, data bits and stop bits, can receive or send any data or characters with ASCII code or hexadecimal, can arbitrarily set the automatic transmission cycle, and can save the received data into text files, can send any data. Text files of meaning size. In terms of hardware connection, traditional desktop PC supports standard RS232 interface, but notebooks with serial port are rare, so USB/232 conversion interface is needed and corresponding driver is installed.)

C++ 系统任务栏图标 例子源码下载