LPC2138

用STM32写的ADS8509的驱动,究竟调试完全通过。(Written with STM32 ADS8509 driver)

stm32f4xx包含启动文件（starup_stm32f4xx.s,system_stm32f4xx.h,system_stm32f4xx.c,system.h)和库函数(stm32f4xx intialize files and library)

捕获到人体心电信号后，用STM32编程显示波形程序(After capturing the human ECG, waveform display program with STM32 programming)

以LPC2138为基础的防火防盗报警显示系统。(LPC2138-based fire burglar alarm display system.)

基于LPC17xx的GPIO驱动，开发环境为Kiel，以调试通过(The routines of LPC1768 is complete the Ethernet control function, through this source code can achieve the 1768 Ethernet connection, have debugging, through, welcome to download)

STM32F103+SSD1963源代码(STM32F103+SSD1963 source code )

这是应用于 windows ce 4.2平台上串口接受的程序，我已经实践过，好用，也可以根据它修改出发送程序(This is used in windows ce 4.2 platform serial port to accept the procedure, I had already been put into practice, use can also be sent out according to its modified procedures)

ATMEGA8_ LTC2400 6位半表头程序 LTC2400最高测量电压为5.3V，超过5.3V或反接都会烧掉。 模拟部分供电最好经过7815稳压，最高输入电压不宜超过18V。 模拟电路与数字电路分开供电。 不要使用开关电源或PWM升压、降压电路供电 (ATMEGA8_ LTC2400 6 ½ -digit meter program LTC2400 highest measured voltage is 5.3V, 5.3V or reverse will be burned over. After 7815 some of the best analog power supply voltage, the maximum input voltage should not exceed 18V. Separate analog and digital circuit power supply. Do not use a switching power supply or PWM buck, boost circuitry)

ALIENTEK MINISTM32 扩展实验21 ENC28J60网络模块实验(ALIENTEK MINISTM32 )

OMAPl138按键控制,用来对开发板进行相应的测试(OMAPl138 button control panel is used to develop the corresponding test)